{"title":"Electronics Module","description":null,"products":[{"product_id":"hw-447-high-power-digital-power-amplifier-board-tpa3116d2-chassis-dedicated-plug-in-5-28v-output-120w","title":"HW-447 High Power Digital Power Amplifier Board TPA3116D2 Chassis Dedicated Plug-in 5-28V Output 120W","description":"\u003cbr\u003e1. Purpose: Digital power amplifier board\u003cbr\u003e2. Chip model: TPA3116\u003cbr\u003e3. Input voltage: DC8-28V\u003cbr\u003e4. Output impedance: 4-82 ohm\u003cbr\u003e5. Output power: 2 x 120w\u003cbr\u003e6. Size: 83x60x25mm\u003cbr\u003e7. Weight: About 65g\u003cbr\u003e\u003cbr\u003eInstructions for use:\u003cbr\u003e1. Connect the power input terminal to a DC8-28V power supply. The recommended power supply is DC24V with a current of 6A, and the output power can reach 120W per channel.\u003cbr\u003e2. Connect the audio input terminal to the audio source, such as MP3, mobile phone, computer, etc.; it is recommended to connect the output terminal of the front power amplifier board\u003cbr\u003e3. Two audio output terminals are connected to two speakers respectively\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628766130523,"sku":"TBD05722755","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD05722755.jpg?v=1773965276"},{"product_id":"waveshare-rs485-can-expansion-board-for-jetson-nano-digital-isolation-built-in-protection-circuit","title":"Waveshare RS485 CAN Expansion Board for Jetson Nano, Digital Isolation, Built-In Protection Circuit","description":"1. Standard 40PIN GPIO extension header, supports direct attaching to Jetson Nano \u003cbr\u003e2. Onboard CAN controller MCP2515 via SPI interface, matching with SIT65HVD230DR transceiver \u003cbr\u003e3. Features RS485 function, controlled via UART, half-duplex communication, supports automatic TX\/RX control without programming, onboard transceiver SP3485 \u003cbr\u003e4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, light-ningproof \u0026amp; anti-electrostatic \u003cbr\u003e5. Onboard digital isolation chip, safer signal isolation communication and better stability and anti-interference \u003cbr\u003e6. Reserved control pins, allows to work with other control boards \u003cbr\u003e7. Comes with development resources and manual (examples in python)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e1. CAN Controller: MCP2515 \u003cbr\u003e2. CAN transceiver: SIT65HVD230DR \u003cbr\u003e3. RS485 transceiver: SP3485 \u003cbr\u003e4. Working voltage: 3.3V \u003cbr\u003e5. Mounting hole size: 3.0mm \u003cbr\u003e6. Dimensions: 100 x 79 mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. RS485 CAN for Jetson Nano x1 \u003cbr\u003e2. Screws pack x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628767768923,"sku":"DOP0498H","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DOP0498H.jpg?v=1773965400"},{"product_id":"waveshare-mcp23017-io-expansion-board-expands-16-i-o-pins","title":"Waveshare MCP23017 IO Expansion Board, Expands 16 I\/O Pins","description":"\u003cb\u003eOverview\u003cbr\u003e\u003c\/b\u003eThe MCP23017 IO Expansion Board expands 2 signal pins as 16 I\/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I\/O pins, it is compatible with both 3.3V and 5V levels.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003cbr\u003e\u003c\/b\u003e1. I2C controlled, expands 2 signal pins as 16 I\/O pins\u003cbr\u003e2. I2C address configurable by shorting the A0\/A1\/A2 jumpers\u003cbr\u003e3. Provides two connector options: PH2.0 terminal and\/or solder pads, allows multi I2C modules to be stacked\u003cbr\u003e4. Onboard voltage translator, compatible with 3.3V\/5V level\u003cbr\u003e5. Comes with development resources and manual (examples for Raspberry Pi \/ micro:bit \/ Arduino \/ STM32)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003cbr\u003e\u003c\/b\u003e1. Operating voltage: 5V\/3.3V\u003cbr\u003e2. Interface: I2C\u003cbr\u003e3. Interrupt pins: INTA, INTB\u003cbr\u003e4. Expansion I\/Os: 16\u003cbr\u003e5. Dimension: 38mm × 23mm\u003cbr\u003e6. Mounting hole size: 2.0mm","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628768883035,"sku":"ZY14280221","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY14280221.jpg?v=1773965439"},{"product_id":"waveshare-solar-panel-6v-5w-16158","title":"Waveshare Solar Panel (6V 5W), 16158","description":"\u003cb\u003eSpecifications\u003cbr\u003e\u003c\/b\u003e1.Solar cell type: 156 monocrystalline cell\u003cbr\u003e2.Surface: toughened glass\u003cbr\u003e3.Frame material: anodic oxidation aluminum alloy\u003cbr\u003e4.Back board material: 0.25mm PET\u003cbr\u003e5.Power: 5.0W ± 5%\u003cbr\u003e6.Operating voltage: 6.0V ± 5%\u003cbr\u003e7.Operating current: 833mA ± 5% (max)\u003cbr\u003e8.Open circuit voltage: 7.2V ± 5%\u003cbr\u003e9.Short circuit current: 916mA ± 5%\u003cbr\u003e10.For use with: Solar Power Manager\u003cbr\u003e\u003cbr\u003eNote: specifications above are tested on standard condition: 1000W\/m2 radiation intensity, 25℃, AM1.5 air quality.\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"16158","offer_id":52628769341787,"sku":"ZY14318310","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY14318310.jpg?v=1773965448"},{"product_id":"waveshare-hrb8825-stepper-motor-hat-for-raspberry-pi-drives-two-stepper-motors-up-to-1-32-microstepping","title":"Waveshare HRB8825 Stepper Motor HAT For Raspberry Pi, Drives Two Stepper Motors, Up To 1\/32 Microstepping","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano \u003cbr\u003e2. Onboard dual HR8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use \u003cbr\u003e3. 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1\/4-step, 1\/8-step, 1\/16-step, and 1\/32-step \u003cbr\u003e4. Adjustable motor drive current via potentiometer, maximum 2.5A current output \u003cbr\u003e5. Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO) \u003cbr\u003e6. Integrates 5V regulator, allows providing power to Raspberry Pi \u003cbr\u003e7. Onboard multi connector options for stepper motors in different specifications \u003cbr\u003e8. Comes with development resources and manual (examples in BCM2835, wiringPi, and python)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e1. Motor controller: HR8825 \u003cbr\u003e2. Motor drive voltage: 8.2V~28V \u003cbr\u003e3. Motor drive current: 2.5A \u003cbr\u003e4. Logic voltage: 3.3V \u003cbr\u003e5. Mounting hole size: 3.0mm \u003cbr\u003e6. Size: 65 x 56mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. Stepper Motor HAT (B) x 1 \u003cbr\u003e2. RPi screws pack (2pcs) x 1 \u003cbr\u003e3. Aluminum heatsink x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628774060379,"sku":"DIY0280","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0280.jpg?v=1773965573"},{"product_id":"waveshare-industrial-usb-to-rs485-converter-17286","title":"Waveshare Industrial USB to RS485 Converter, 17286","description":"\u003cb\u003eAbout The Product\u003c\/b\u003e\u003cbr\u003eOverview \u003cbr\u003e1. This is an industrial USB to RS485 converter with original FT232RL and SP485EEN inside. It features embedded protection circuits such as lightningproof, resettable fuse, ESD protection, and TVS diode, etc. It is pretty small in size. \u003cbr\u003e2. The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for industrial control equipments and\/or applications with high communication requirement. \u003cbr\u003e \u003cbr\u003eFeatures \u003cbr\u003e1. USB to RS485 communication \u003cbr\u003e2. Adopt original FT232RL and SP485EEN, fast communicating, stable and reliable, better compatibility \u003cbr\u003e3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof \u0026amp; anti-electrostatic \u003cbr\u003e4. Onboard self-recovery fuse and protection diodes, ensures the current\/voltage stable outputs, provides over-current\/over-voltage proof, improves shock resistance \u003cbr\u003e5. 3 LEDs for indicating the power and transceiver status \u003cbr\u003e \u003cbr\u003eSpecifications \u003cbr\u003e1. Product type: Industrial converter \u003cbr\u003e2. Baudrate: 300-921600bps \u003cbr\u003e3. Host port: USB \u003cbr\u003e4. Device port:  RS485 \u003cbr\u003e5. USB: \u003cbr\u003e- Operating voltage: 5V \u003cbr\u003e- Connector: USB-A \u003cbr\u003e- Protection: 200mA self-recovery fuse, ESD protection \u003cbr\u003e- Transmission distance: about 5m \u003cbr\u003e6. RS485: \u003cbr\u003e- Connector: screw terminal \u003cbr\u003e- Pins: A+, B-, GND \u003cbr\u003e- Direction control: hardware automatic control \u003cbr\u003e- Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (onboard 120R balancing resistor) \u003cbr\u003e- Transmission distance: about 1200m (low rate) \u003cbr\u003e- Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) \u003cbr\u003e7. LED indicators: \u003cbr\u003e- PWR: red power indicator, light up when there is USB connection and voltage is detected \u003cbr\u003e- TXD: red TX indicator, light up when the USB port sends data \u003cbr\u003e- RXD: red RX indicator, light up when the device ports send data back \u003cbr\u003e8. Operating environment: \u003cbr\u003e- Temperature: -15 ~ 70 degree \u003cbr\u003e- Humidity: 5%RH ~ 95%RH \u003cbr\u003e9. Operating system: Mac, Linux, Android, WinCE, Windows 10 \/ 8.1 \/ 8 \/ 7 \/ XP\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. USB TO RS485 x 1 \u003cbr\u003e2. USB-A male to female cable x 1 \u003cbr\u003e3. Screwdriver x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"17286","offer_id":52628774650203,"sku":"DIY0189","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0189.jpg?v=1773965622"},{"product_id":"waveshare-0-91-inch-oled-display-module-128x32-pixels-i2c-interface-14657","title":"Waveshare 0.91 inch OLED Display Module, 128x32 Pixels, I2C Interface, 14657","description":"Overview\u003cbr\u003eThis is a general OLED display Module, 0.91inch diagonal, 128x32 pixels, with embedded controller, communicating via I2C interface.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e1. 0.91inch small form factor\u003cbr\u003e2. 128x32 high resolution\u003cbr\u003e3. I2C interface, requires only two signal pins\u003cbr\u003e4. Comes with development resources and manual (examples for Raspberry Pi\/Arduino\/STM32)\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e1. Driver: SSD1306\u003cbr\u003e2. Interface: I2C\u003cbr\u003e3. Display color: White\u003cbr\u003e4. Resolution: 128x32\u003cbr\u003e5. Viewing angle: \u0026gt;160 degree\u003cbr\u003e6. Operating voltage: 3.3V \/ 5V\u003cbr\u003e7. Dimension: 36 x 12.5 (mm)\u003cbr\u003e\u003cbr\u003ePackage Contents\u003cbr\u003e1. 0.91inch OLED Module x1\u003cbr\u003e3. PH2.0 4Pin x1","brand":"GadgetHQ","offers":[{"title":"14657","offer_id":52628775010651,"sku":"ZY15797936","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY15797936.jpg?v=1773965652"},{"product_id":"waveshare-raspberry-pi-zero-2w-to-3b-adapter-for-raspberry-pi-3-model-b-b-pi-zero-2w-to-3b","title":"Waveshare Raspberry Pi Zero 2W To 3B Adapter for Raspberry Pi 3 Model B\/B+, Pi Zero 2W To 3B","description":"1. Using pogo pin connection, the Zero 2W can be easily attached \u003cbr\u003e2. Easily compatible with the interfaces of Raspberry Pi 3B \/ 3B+ boards \u003cbr\u003e3. Onboard headphone jack(extended from USB) and an additional speaker header \u003cbr\u003e4. Onboard 4-ch USB ports, compatible with USB 2.0 \/ 1.1 transmission \u003cbr\u003e5. Onboard RTL8152B Ethernet chip, support 1-ch RJ45 Ethernet port, 10 \/ 100 M adaptive \u003cbr\u003e6. Not compatible with the first generation Zero \u003cbr\u003e \u003cbr\u003ePackage List: \u003cbr\u003e1. Zero-to-Pi3-Adapter (B) x 1 \u003cbr\u003e2. HD-MI Adapter x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Pi Zero 2W To 3B","offer_id":52628776911195,"sku":"DIY0271","price":50.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0271.jpg?v=1773965849"},{"product_id":"waveshare-2-8-inch-480x640-hdmi-ips-lcd-display-h-fully-laminated-screen","title":"Waveshare 2.8 inch 480x640 HDMI IPS LCD Display (H) Fully Laminated Screen","description":"\u003cb\u003eCompatible Models\u003c\/b\u003e\u003cbr\u003eFor Raspberry Pi \u003cbr\u003e1. Support Raspberry Pi OS \/ Ubuntu \/ Kali \/ WIN10 IoT \/ Retropie \u003cbr\u003e2. Driver free for USB-C touch \u003cbr\u003e3. Config file is required for I2C touch \u003cbr\u003e4. Supports all versions of Raspberry Pi \u003cbr\u003e \u003cbr\u003eFor Jetson Nano \u003cbr\u003e1. Support Ubuntu \u003cbr\u003e2. PC \u003cbr\u003e3. Support Windows 11 \/ 10 \/ 8.1 \/ 8 \/ 7 \u003cbr\u003e4. For Jetson Nano and PC, only USB-C touch is available\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. 2.8 inch HDMI LCD (H) x 1 \u003cbr\u003e2. HDMI Adapter (C) x 1 \u003cbr\u003e3. HDMI Adapter (B) x 1 \u003cbr\u003e4. HDMI cable x 1 \u003cbr\u003e5. USB-A to USB-C cable x 1 \u003cbr\u003e6. Screws pack x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628777238875,"sku":"DIY0227","price":87.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0227.jpg?v=1773965878"},{"product_id":"waveshare-mq-3-gas-sensor-mq-3","title":"Waveshare MQ-3 Gas Sensor, MQ-3","description":"Overview\u003cbr\u003e1. Sensitive for alcohol, ethanol\u003cbr\u003e2. Output voltage boosts along with the concentration of the measured gases increases\u003cbr\u003e3. Fast response and recovery\u003cbr\u003e4. Adjustable sensitivity\u003cbr\u003e5. Signal output indicator\u003cbr\u003e\u003cbr\u003eSpecifications\u003cbr\u003e1. Power: 2.5V ~ 5.0V\u003cbr\u003e2. Dimension: 40.0mm * 21.0mm\u003cbr\u003e3. Mounting holes size: 2.0mm\u003cbr\u003e\u003cbr\u003eApplications\u003cbr\u003e1. Car alcohol alarm\u003cbr\u003e2. Breathalyser\u003cbr\u003e\u003cbr\u003eHow to Use\u003cbr\u003eIn the case of working with a MCU:\u003cbr\u003e1. VCC: 2.5V ~ 5.0V\u003cbr\u003e2. GND: Power supply ground\u003cbr\u003e3. AOUT: MCU.IO (analog output)\u003cbr\u003e4. DOUT: MCU.IO (digital output)\u003cbr\u003e\u003cbr\u003ePackage Contents\u003cbr\u003e1. MQ-3 Gas Sensor x1\u003cbr\u003e2. 4-pin custom connector jumper wire x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"MQ-3","offer_id":52628778254683,"sku":"ZY15927471","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY15927471.jpg?v=1773965934"},{"product_id":"4-way-fast-charging-module-usb-mobile-phone-charging-board","title":"4-Way Fast Charging Module USB Mobile Phone Charging Board","description":"\u003cbr\u003e1. Soft start function\u003cbr\u003e2. Conversion efficiency reaches 97%\u003cbr\u003e3. 220Khz switching frequency\u003cbr\u003e4. Built-in synchronous switch step-down converter chip\u003cbr\u003e5. Output voltage range: 3V to 12V, automatically adjusted according to the fast charge protocol\u003cbr\u003e6. Used in car chargers, fast charging adapters, smart power strips, solar chargers, etc.\u003cbr\u003e7. This module is a 4-way pressure drop fast charging module, please use 12V-30V DC power supply, and the positive and negative poles cannot be reversed.\u003cbr\u003e8. Input voltage range: 4.5V to 32V (the input voltage must be higher than the output voltage, because it is a voltage drop module)\u003cbr\u003e9. Multiple protections, high reliability, output over current, input over voltage, input under voltage, output short circuit protection, over temperature protection of the whole machine\u003cbr\u003e10. The output has CV\/CC characteristics (output current is less than the set value, output CV mode; output current is greater than the set value, output CC mode)\u003cbr\u003e11. PCB adopts FR-4 1.6mm thickness design, optimized layout and wiring, tight design, open window on the back for heat dissipation, low full load working temperature, standby current 0.013A, module has output voltage compensation function\u003cbr\u003e12. Each of the four channels supports QC 3.0 fast charging protocol, and can support fast charging at the same time, and can output 5V\/9V\/12V (requires mobile phone protocol support) voltage, output current is adaptive, single channel power consumption 24W, 4 channels module Power consumption 96W\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628778811739,"sku":"TBD06017072","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD06017072.jpg?v=1773965990"},{"product_id":"waveshare-metal-box-a-for-raspberry-pi-cm4-io-board-with-cooling-fan","title":"Waveshare Metal Box A for Raspberry Pi CM4 IO Board, with Cooling Fan","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e1. Mini computer chassis, robust and dust-proof, nice looking \u003cbr\u003e2. Tailored For Compute Module 4 IO Board: Make it easy to build your own Raspberry Pi CM4 mini PC \u003cbr\u003e3. Break-out 40PIN GPIO Header: The standard 40 PIN GPIO header is still available, make it easy to connect sorts of HATs \u003cbr\u003e4. Precise cut-out with clear label: Each cut-out Is completely aligned with the connector \u003cbr\u003e5. Come with cooling fan, combined with airflow vent, better heat dissipation \u003cbr\u003e6. Application: Binocular vision, PoE  powered Raspberry Pi Projects, or other industrial context\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. Metal case (top and bottom) x 1 \u003cbr\u003e2. 40PIN GPIO adapter x 1 \u003cbr\u003e3. Fan-4010-PWM-12V x 1 \u003cbr\u003e4. Screwdriver x 1 \u003cbr\u003e5. Screws pack x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628779827547,"sku":"DIY0492","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0492.jpg?v=1773966047"},{"product_id":"waveshare-lora-hat-433mhz-frequency-band-for-raspberry-pi-applicable-for-europe-asia-africa-433mhz","title":"Waveshare LoRa HAT 433MHz Frequency Band for Raspberry Pi, Applicable for Europe \/ Asia \/ Africa, 433MHz","description":"Overview\u003cbr\u003e1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.\u003cbr\u003e2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.\u003cbr\u003e3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards\u003cbr\u003e2. Onboard CP2102 USB TO UART converter, for serial debugging\u003cbr\u003e3. Bring the UART control interface, for connecting host boards like Arduino\/STM32\u003cbr\u003e4. 4x LED indicators, easy to check the module status\u003cbr\u003e5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference\u003cbr\u003e6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region\u003cbr\u003e7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications\u003cbr\u003e8. Customizable communication key which wont be retrieved, greatly improves the security of user data\u003cbr\u003e9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment\u003cbr\u003e10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network\u003cbr\u003e11. Support wireless parameter configuration, by sending wireless command\/data packet, remotely configure or retrieve the module parameter\u003cbr\u003e12. Support fixed-point transmission, broadcast, signal channel monitor\u003cbr\u003e13. Come with development resources and manual (examples for Raspberry Pi\/STM32)\u003cbr\u003e\u003cbr\u003eWhat is on Board\u003cbr\u003e1. SX1268 LoRa module\u003cbr\u003e2. 74HC125V: voltage level translator\u003cbr\u003e3. CP2102: USB TO UART converter\u003cbr\u003e4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi\u003cbr\u003e5. USB TO UART port\u003cbr\u003e6. UART header: for connecting host boards like STM32\/Arduino\u003cbr\u003e7. SMA antenna connector\u003cbr\u003e8. IPEX antenna connector\u003cbr\u003e9. Indicators:\u003cbr\u003e- RXD\/TXD: UART RX\/TX indicator\u003cbr\u003e- AUX: auxiliary indicator\u003cbr\u003e- PWR: power indicator\u003cbr\u003e10. UART selection jumpers\u003cbr\u003e- A: Control the LoRa module through USB TO UART\u003cbr\u003e- B: Control the LoRa module through Raspberry Pi\u003cbr\u003e- C: Access Raspberry Pi through USB TO UART\u003cbr\u003e11. LoRa mode selection jumpers\u003cbr\u003e- Short M0, short M1: Transmission mode\u003cbr\u003e- Short M0, open M1: Configuration mode\u003cbr\u003e- Open M0, short M1: WOR mode\u003cbr\u003e- Open M0, open M1: deep sleep mode\u003cbr\u003e\u003cbr\u003eSpecification\u003cbr\u003e1. RF module: SX1268\u003cbr\u003e2. Frequency band: 410.125 ~ 493.125MHz\u003cbr\u003e3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)\u003cbr\u003e4. Transmit power: 22.0dBm (10\/13\/17\/22dBm programmable)\u003cbr\u003e5. Receive sensitivity: -147dBm (radio rate 2.4kbps)\u003cbr\u003e6. Power consumption: \u003cbr\u003e- Transmit current: 110mA (transient consumption)\u003cbr\u003e- Receive current: 11mA\u003cbr\u003e- Sleep current: 2uA (LoRa module software shutoff)\u003cbr\u003e7. Communication interface: UART (TTL level)\u003cbr\u003e8. Baudrate: 1200bps ~ 115200bps (9600bps by default)\u003cbr\u003e9. Packet length: 240 Byte (32\/64\/128\/240 Byte programmable)\u003cbr\u003e10. Cache: 1000 Byte\u003cbr\u003e11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)\u003cbr\u003e12. Power supply: 5V\u003cbr\u003e13. Logic level: 3.3V\/5V\u003cbr\u003e14. Operating temperature: -40~85 degree C\u003cbr\u003e15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications\u003cbr\u003e16. Dimensions: 7cm x 12cm x 2cm\u003cbr\u003e17. Weight: 69g\u003cbr\u003e18. Packing List:\u003cbr\u003e- SX1268 433MHz LoRa HAT x1\u003cbr\u003e- USB type A plug to micro plug cable x1\u003cbr\u003e- 433MHz antenna x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"433MHz","offer_id":52628780581211,"sku":"ZY23018506","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY23018506.jpg?v=1773966085"},{"product_id":"waveshare-5-5-inch-1080x1920-capacitive-touch-screen-amoled-with-toughened-glass-cover-hdmi-interface-supports-multi-systems-5-5-inch","title":"Waveshare 5.5 inch 1080x1920 Capacitive Touch Screen AMOLED with Toughened Glass Cover, HDMI interface, Supports Multi Systems, 5.5 inch","description":"Overview\u003cbr\u003eThis is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e1. 5.5 inch AMOLED, 1080x1920 resolution\u003cbr\u003e2. Toughened glass capacitive touch panel, 6H hardness\u003cbr\u003e3. Support popular mini PCs such as Raspberry Pi, Jetson Nano, as well as general desktop computers\u003cbr\u003e4. When works with Raspberry Pi, supports  Raspbian \/ Ubuntu \/ Kali \/ Retropie, driver free\u003cbr\u003e5. When works as a computer monitor, support Windows 10\/8.1\/8\/7, five-points touch, and driver free\u003cbr\u003e6. 3.5mm audio jack, supports HDMI audio output\u003cbr\u003e7. M2.5 screw holes for easy mounting\u003cbr\u003e\u003cbr\u003ePackage Contents\u003cbr\u003e1. 5.5inch HDMI AMOLED x1\u003cbr\u003e2. HDMI cable x1\u003cbr\u003e3. USB type A plug to micro B plug cable x1\u003cbr\u003e4. HDMI adapter (B) x1\u003cbr\u003e5. USB adapter (B) x1\u003cbr\u003e6. Screws pack x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"5.5 inch","offer_id":52628782743899,"sku":"ZY15801392","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY15801392.jpg?v=1773966307"},{"product_id":"hw-243-w5500-ethernet-network-module-hardware-tcp-ip-51-stm32-single-chip-program","title":"HW-243 W5500 Ethernet Network Module Hardware TCP \/ IP 51 \/ STM32 Single-Chip Program","description":"\u003cbr\u003e1. No need to write Ethernet underlying code to implement TCP\/IP protocol stack\u003cbr\u003e2. Support sleep mode and wake-up on LAN, internal integrated 32K bytes on-chip buffer for Ethernet packet processing\u003cbr\u003e3. Support 10\/100MBPS transfer rate\u003cbr\u003e4. Support 8 independent ports working at the same time\u003cbr\u003e5. The module supports 5V or 3. 3V power supply, which is convenient for users to use in different SCM systems\u003cbr\u003e6. The communication method between the module and the microcontroller is SPI protocol, which supports speeds up to 80MHz\u003cbr\u003e7. If you use the 5500 Ethernet module, you only need some simple Socket programming to realize the Ethernet application\u003cbr\u003e8. Support protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE\u003cbr\u003e9. We provide users with the source code of the routines based on the 51 single-chip microcomputer and ISTM32 single-chip microcomputer in the \"client\", \"server\" and \"UDP\" three working modes, as well as a detailed manual\u003cbr\u003e10. Chip model: W5500\u003cbr\u003e11. Input voltage: 3.3-5v\u003cbr\u003e12. Size: about 55 x 28mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628783202651,"sku":"TBD05722754","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD05722754.jpg?v=1773966353"},{"product_id":"waveshare-rp2040-lcd-0-96-pico-like-mcu-board-based-on-raspberry-pi-mcu-rp2040-with-pinheader-rp2040-lcd-0-96","title":"Waveshare RP2040-LCD-0.96 Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with Pinheader, RP2040-LCD-0.96","description":"RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi RP2040 microcontroller chip, as same as on Raspberry Pi Pico. For software development, either Raspberry Pi C\/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly. \u003cbr\u003eIn additional, there are also onboard 0.96inch IPS display, Lithium battery recharge\/discharge header, and high efficiency DC-DC buck-boost chip. \u003cbr\u003e \u003cbr\u003eKey features include: \u003cbr\u003e1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom \u003cbr\u003e2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz \u003cbr\u003e3. 264KB of SRAM, and 2MB of on-board Flash memory \u003cbr\u003e4. USB-C connector, keeps it up to date, easier to use \u003cbr\u003e5. 0.96 inch 160x80 pixels 65K colorful IPS LCD display \u003cbr\u003e6. Lithium battery recharge\/discharge header, suitable for mobile devices \u003cbr\u003e7. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch \u003cbr\u003e8. Castellated module allows soldering direct to carrier boards (there should be dedicated cut-out for embedding the bottom components) \u003cbr\u003e9. USB 1.1 with device and host support \u003cbr\u003e10. Low-power sleep and dormant modes \u003cbr\u003e11. Drag-and-drop programming using mass storage over USB \u003cbr\u003e13. 26 x multi-function GPIO pins \u003cbr\u003e14. 2 x SPI, 2 x I2C, 2 x UART, 3 x 12-bit ADC, 16 x controllable PWM channels \u003cbr\u003e15. Accurate clock and timer on-chip \u003cbr\u003e16. Temperature sensor \u003cbr\u003e17. Accelerated floating-point libraries on-chip \u003cbr\u003e18. 8 x Programmable I\/O (PIO) state machines for custom peripheral support\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"RP2040-LCD-0.96","offer_id":52628783333723,"sku":"DIY0225","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0225.jpg?v=1773966378"},{"product_id":"waveshare-rpi-camera-g-module-wide-field-of-view-fisheye-lens","title":"Waveshare RPi Camera (G) Module, Wide Field of View Fisheye Lens","description":"Features\u003cbr\u003e1. Raspberry Pi Camera, supports all revisions of the Pi\u003cbr\u003e2. Fisheye Lens, offers wider field of view\u003cbr\u003e3. 5 megapixel OV5647 sensor\u003cbr\u003e4. Adjustable focus distance\u003cbr\u003e5. Camera specifications\u003cbr\u003e- CCD size : 1\/4inch\u003cbr\u003e- Aperture (F) : 2.35\u003cbr\u003e- Focal Length : 3.15mm\u003cbr\u003e- Angle of View (diagonal) : 160 degree (while other normal cameras 5.5are typically 72 degree)\u003cbr\u003e- Sensor best resolution : 1080p\u003cbr\u003e6. 4 screw holes\u003cbr\u003e- Used for attachment\u003cbr\u003e- Provides 3.3V power output\u003cbr\u003e- Supports connecting fill flash LED\u003cbr\u003e7. Dimension: 25mm x 24mm\u003cbr\u003e\u003cbr\u003ePackage Contents\u003cbr\u003e1. RPi Camera (G) x1\u003cbr\u003e2. 15-pin FFC (opposite sides contact) x1\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote:\u003c\/b\u003e to use the camera with Raspberry Pi Zero \/ Zero W \/ Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628783432027,"sku":"ZY15876901","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY15876901.jpg?v=1773966388"},{"product_id":"waveshare-barcode-scanner-module-1d-2d-codes-reader-14810","title":"Waveshare Barcode Scanner Module, 1D\/2D Codes Reader, 14810","description":"\u003cb\u003eOverview\u003cbr\u003e\u003c\/b\u003e1. This is a small 1D\/2D codes reader, by using the intelligent image recognition algorithm, it will decode the barcode or 2D code on paper or screen, fast and accurately.\u003cbr\u003e2. Through the onboard USB and UART interface, it can be directly plugged into a computer, or be easily integrated to kinds of devices due to its small form factor.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003cbr\u003e\u003c\/b\u003e1. Easy to use, requires no knowledges of image recognition\u003cbr\u003e2. Decodes various common 1D\/2D codes such as Barcode, QR code etc.\u003cbr\u003e3. Onboard micro USB and UART serial port, allows to connect with computers or embedded devices\u003cbr\u003e4. Configurable via scanning configuration code\u003cbr\u003e5. Onboard light source, works in the dark\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003cbr\u003e\u003c\/b\u003e1. Operating voltage: 5V\u003cbr\u003e2. Operating current: 135mA (scanning), 58mA (standby), 2mA (sleep)\u003cbr\u003e3. Operating temperature: 0°C~60°C\u003cbr\u003e4. Operating humidity: 5%~95% (Non-condensing)\u003cbr\u003e5. Communication interface: UART, USB\u003cbr\u003e6. Decodes 1D codes: Codebar, Code 11, Code 39\/Code 93, UPC\/EAN, Code 128\/EAN128, Interleaved 2 of 5, Matrix 2 of 5, MSI Code, Industrial 2 of 5, GS1 Databar(RSS)\u003cbr\u003e7. Decodes 2D codes: QR code, Data Matrix, PDF417\u003cbr\u003e8. Light source: white\u003cbr\u003e9. Scan angels: roll 360°, skew ±65°, pitch ±60°\u003cbr\u003e10. Field of view: 28° (horizontal), 21.5° (vertical)\u003cbr\u003e11. Dimension: 53.3mm x 21.4mm\u003cbr\u003e12. Package contents:\u003cbr\u003e- Barcode Scanner Module x1\u003cbr\u003e- USB type A plug to micro B plug cable x1\u003cbr\u003e- PH2.0 4Pin x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"14810","offer_id":52628798013787,"sku":"ZY14328032","price":72.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY14328032.jpg?v=1773968048"},{"product_id":"waveshare-raspberry-pi-camera-module-embedded-ir-cut-supports-night-vision-type-b","title":"Waveshare Raspberry Pi Camera Module, Embedded IR-CUT, Supports Night Vision, Type B","description":"Features\u003cbr\u003e1. Raspberry Pi camera, supports all revisions of the Pi\u003cbr\u003e2. Embedded removable IR-CUT filter, eliminating color distortion in the daylight\u003cbr\u003e3. Comes with infrared LED, supports night vision\u003cbr\u003e4. 5 megapixel OV5647 sensor\u003cbr\u003e5. Adjustable focus distance\u003cbr\u003e6. Camera specifications\u003cbr\u003e- CCD size: 1\/4 inch\u003cbr\u003e- Aperture (F): 1.2\u003cbr\u003e- Focal Length: 8mm\u003cbr\u003e- Angle of View (diagonal): 40 degree\u003cbr\u003e- Sensor best resolution: 1080p\u003cbr\u003e7. 4 screw holes\u003cbr\u003e- Used for attachment\u003cbr\u003e- Provides 3.3V power output\u003cbr\u003e- Supports connecting infrared LED and\/or fill flash LED\u003cbr\u003e8. Dimension: 31mm x32mm\u003cbr\u003e\u003cbr\u003eNote: To use the camera with Raspberry Pi Zero \/ Zero W \/ Zero WH, you need to buy a specific cable: Raspberry Pi Zero v1.3 Camera Cable\u003cbr\u003e\u003cbr\u003eNote: The actual image pixels is 5MP, which depends on the sensor, so it doesnt matter that there is a 3MP silk mark on the camera.\u003cbr\u003ePackage Contents\u003cbr\u003e1. RPi IR-CUT Camera (B) x1\u003cbr\u003e2. Infrared LED Board (B) x2\u003cbr\u003e3. 15-pin FFC (opposite sides contact) x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628798308699,"sku":"ZY15882739","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY15882739.jpg?v=1773968084"},{"product_id":"waveshare-3-7-inch-480x280-pixel-e-paper-e-ink-display-module-for-raspberry-pi-pico-4-grayscale-spi-interface-20123","title":"Waveshare 3.7 inch 480x280 Pixel E-Paper E-Ink Display Module for Raspberry Pi Pico, 4 Grayscale, SPI Interface, 20123","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e1. No backlight, keeps displaying last content for a long time even when power down \u003cbr\u003e2. Ultra low power consumption, basically power is only required for refreshing \u003cbr\u003e3. SPI interface, requires minimal IO pins \u003cbr\u003e4. Onboard voltage translator, compatible with 3.3V \/ 5V MCUs \u003cbr\u003e5. Comes with development resources and manual (Raspberry Pi Pico C\/C++ and MicroPython examples)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003e1. Operating voltage: 3.3V\/5V \u003cbr\u003e2. Display color: Black, white \u003cbr\u003e3. Resolution: 480x280 pixels \u003cbr\u003e4. Grey scale: 4 \u003cbr\u003e5. Interface: 3-wire SPI, 4-wire SPI \u003cbr\u003e6. Viewing angle: Greater than 170 degree \u003cbr\u003e7. Partial refresh time: 0.3s \u003cbr\u003e8. Full refresh time: 3s \u003cbr\u003e9. Outline dimensions: 95.3 x 56.9mm \u003cbr\u003e10. Display size: 81.12 x 47.32mm \u003cbr\u003e11. Refresh power: 26.4mW (typ.) \u003cbr\u003e12. Standby current: Less than 0.01uA (almost none) \u003cbr\u003e13. Dot pitch: 0.169 x 0.169 mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. Pico-ePaper-3.7 x 1 \u003cbr\u003e2. Standoff pack x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"20123","offer_id":52628858798427,"sku":"DIY0166","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0166.jpg?v=1773970521"},{"product_id":"waveshare-7-5-inch-800x480-pixel-red-black-white-e-paper-e-ink-display-module-b-for-raspberry-pi-pico-spi-interface-20129","title":"Waveshare 7.5 inch 800x480 Pixel Red Black White E-Paper E-Ink Display Module (B) for Raspberry Pi Pico, SPI Interface, 20129","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e1. No backlight, keeps displaying last content for a long time even when power down \u003cbr\u003e2. Ultra low power consumption, basically power is only required for refreshing \u003cbr\u003e3. SPI interface, requires minimal IO pins \u003cbr\u003e4. 2x user buttons and 1x reset button for easy interacting \u003cbr\u003e5. Comes with development resources and manual (Raspberry Pi Pico C\/C++ and MicroPython examples)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages Of EINK\u003c\/b\u003e\u003cbr\u003e1. E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. \u003cbr\u003e2. E-paper display will clearly display images\/texts under lamplight or natural light, requires no backlight, and features nearly up to 180 degree viewing angle. It is usually used as e-reader due to its paper-like effect.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003e1. Operating voltage: 3.3V \u003cbr\u003e2. Display color: Red, black, white \u003cbr\u003e3. Resolution: 800x480 pixels \u003cbr\u003e4. Grey scale: 2 \u003cbr\u003e5. Interface: 3-wire SPI, 4-wire SPI \u003cbr\u003e6. Viewing angle: Greater than 170 degree \u003cbr\u003e7. Partial refresh time: N\/A \u003cbr\u003e8. Full refresh time: 5s \u003cbr\u003e9. Outline dimensions: 170.2 x 111.2mm \u003cbr\u003e10. Display size: 163.2 x  97.92mm \u003cbr\u003e11. Refresh power: 26.4mW (typ.) \u003cbr\u003e12. Standby current: Less than 0.01uA (almost none) \u003cbr\u003e13. Dot pitch: 0.204 x 0.204 mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. 7.5 inch e-Paper  x1 \u003cbr\u003e2. Pico-ePaper-Driver-Board x1 \u003cbr\u003e3. Standoff pack x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"20129","offer_id":52628859126107,"sku":"DIY0172","price":108.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0172.jpg?v=1773970538"},{"product_id":"waveshare-5-inch-slimmed-down-version-800-x-480-toughened-glass-panel-capacitive-touch-screen-lcd-h-5-inch","title":"Waveshare 5 inch Slimmed-down Version 800 x 480 Toughened Glass Panel Capacitive Touch Screen LCD (H), 5 inch","description":"\u003cb\u003eDevice \u0026amp; System Support\u003c\/b\u003e\u003cbr\u003eRaspberry Pi \u003cbr\u003e1. Support Raspbian, 5-points touch, driver free \u003cbr\u003e2. Support Ubuntu \/ Kali \/ WIN10 IoT, single point touch, driver free \u003cbr\u003e3. Support Retropie, driver free \u003cbr\u003e4. Support all versions of Raspberry Pi \u003cbr\u003e \u003cbr\u003ePC \u003cbr\u003eSupport Windows 10 \/ 8.1 \/ 8 \/ 7, 5-points touch, driver\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTouch Control\u003c\/b\u003e\u003cbr\u003e1. Up to 5-points touch, depending on the operating system.  \u003cbr\u003e2. Up to 6H hardness toughened glass panel.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. 5 inch HDMI LCD (H) V4 x1 \u003cbr\u003e2. HDMI cable x1 \u003cbr\u003e3. HDMI to Micro HDMI Adapter x1 \u003cbr\u003e4. USB type A plug to micro B plug cable x1 \u003cbr\u003e5. RPi screws pack (4pcs) x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"5 inch","offer_id":52628860240219,"sku":"DIY0176","price":91.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0176.jpg?v=1773970576"},{"product_id":"waveshare-raspberry-pi-poe-hat-ethernet-expansion-board-for-raspberry-pi-3b-4b","title":"Waveshare Raspberry Pi PoE+ HAT Ethernet Expansion Board for Raspberry Pi 3B+\/4B","description":"\u003cb\u003eProduct Overview\u003c\/b\u003e\u003cbr\u003e1. The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+\/4B. Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af\/at standard with 5V DC\/4A larger power output, providing enough power for both Raspberry Pi 3B+\/4B at max load and other peripherals at the same time. \u003cbr\u003e2. By using this small HAT and some proper 802.3af\/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003e1. PoE standard: 802.3af\/at \u003cbr\u003e2. Input voltage: 37-57 V DC, Class 4 device \u003cbr\u003e3. Output voltage\/current: 5V DC\/4A \u003cbr\u003e4. Current sense: Yes \u003cbr\u003e5. Transformer design: Planar \u003cbr\u003e6. Fan: Controllable brushless cooling fan, delivering 2.2 CFM for processor cooling \u003cbr\u003e7. Fan size: 25 x 25mm \u003cbr\u003e8. Feature: Fully isolated switched-mode power supply \u003cbr\u003e9. Compatible with: Raspberry Pi 3B+\/4B\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. Raspberry Pi PoE+ HAT x1 \u003cbr\u003e2. Standoffs pack x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628860862811,"sku":"DIY0180","price":81.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0180.jpg?v=1773970594"},{"product_id":"waveshare-mini-io-board-full-ver-mini-computer-base-box-with-metal-case-cooling-fan-for-raspberry-pi-cm4-mini-io-board-full-ver","title":"Waveshare Mini IO Board Full Ver Mini-Computer Base Box with Metal Case \u0026 Cooling Fan for Raspberry Pi CM4, Mini IO Board Full Ver","description":"\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003e1. USB:  \u003cbr\u003e- USB 2.0 x 2 \u003cbr\u003e- USB 2.0 x 2 (via FFC connector) \u003cbr\u003e2. GPIO: Raspberry Pi 40 PIN GPIO x 1 \u003cbr\u003e3. Header: M.2 slot x 1 \u003cbr\u003e4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output \u003cbr\u003e5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) \u003cbr\u003e6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) \u003cbr\u003e7. Power input: 5V \u003cbr\u003e8. FAN: 5V \/ 12V (no fan control) \u003cbr\u003e9. RJ45 Ethernet: Gigabit Ethernet \u003cbr\u003e10. CM4 slot: Suitable for all variants of Compute Module 4 \u003cbr\u003e11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants \u003cbr\u003e12. Size: 85.0 x 56.0mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. CM4-IO-BASE-B x 1 \u003cbr\u003e2. Metal case (top and bottom) x 1 \u003cbr\u003e3. Fan-4010-PWM-5V x 1 \u003cbr\u003e4. Screwdriver x 1 \u003cbr\u003e5. Screws pack x 1 \u003cbr\u003e6. 5V 3A USB-C power adapter x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Mini IO Board Full Ver \/ EU Plug","offer_id":52628862271835,"sku":"DIY0181EU","price":80.99,"currency_code":"USD","in_stock":true},{"title":"Mini IO Board Full Ver \/ US Plug","offer_id":52628862304603,"sku":"DIY0181US","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0181EU.jpg?v=1773970614"},{"product_id":"waveshare-multi-band-2g-gsm-gprs-lbs-a7670e-lte-cat-1-hat-for-raspberry-pi-for-europe-southeast-asia-west-asia-africa-china-south-kor-a7670e-lte-cat-1-hat","title":"Waveshare Multi Band 2G GSM \/ GPRS LBS A7670E LTE Cat-1 HAT for Raspberry Pi, for Europe, Southeast Asia, West Asia, Africa, China, South Kor, A7670E LTE Cat-1 HAT","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003eThe A7670E Cat-1 HAT is an LTE Cat-1 module, which supports wireless communication modes including LTE-TDD, LTE-FDD, GSM, GPRS and EDGE, with up to 10Mbps downlink rate and 5Mbps uplink rate. It supports Windows\/Linux operating systems and multiple network protocols. The module size is the same as SIM7000\/SIM7070 series, and the AT commands is mostly compatible with SIM7600 series. It is suitable for IoT applications like remote information processing, monitoring devices, POS, industrial routers, remote diagnosis, and so on. \u003cbr\u003e \u003cbr\u003e1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards \u003cbr\u003e2. Support protocols including TCP\/IP, HTTP(s), MQTT(s), FTP(s), and SSL \u003cbr\u003e3. Support dial-up, telephone call, SMS \u003cbr\u003e4. Support LBS base station positioning, it is able to get the approximate position info via mobile network \u003cbr\u003e5. TTS (Text To Speech) feature, texts in Chinese\/English can be converted into spoken words \u003cbr\u003e6. Onboard USB interface, for testing AT Commands, network communication, and so on \u003cbr\u003e7. Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc. \u003cbr\u003e8. Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Arduino\/STM32 \u003cbr\u003e9. SIM card slot, supports 1.8V\/3V SIM card \u003cbr\u003e10. 2x LED indicators, easy to monitor the operating status \u003cbr\u003e11. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper \u003cbr\u003e12. Come with development resources and manual (examples for Raspberry Pi\/Arduino\/STM32)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003eFrequency band \u003cbr\u003e1. LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20 \u003cbr\u003e2. 2G: GSM\/GPRS\/EDGE: 900\/1800 MHz \u003cbr\u003eSMS and audio \u003cbr\u003e1. SMS: Supported types: MT, MO, CB, Text, PDU \u003cbr\u003e2. Storage: USIM card (CB could not be stored on SIM card) \u003cbr\u003e3. Audio feature: Standard 3.5mm audio jack for audio input\/output \u003cbr\u003eOthers \u003cbr\u003e1. Power supply: 5V \u003cbr\u003e2. Operating voltage:5V \/ 3.3V (configured via jumper) \u003cbr\u003e3. Operating temperature: -30 degree C ~ 80degree C \u003cbr\u003e4. Storage temperature: -45 degree C ~ 90 degree C \u003cbr\u003e5. Dimensions: 65 x 30.5mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. A7670E Cat-1 HAT x 1 \u003cbr\u003e2. LTE Antenna x 1 \u003cbr\u003e3. USB-A to USB-C cable x 1 \u003cbr\u003e4. RPi screws pack x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"A7670E LTE Cat-1 HAT","offer_id":52628862697819,"sku":"DIY0182","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0182.jpg?v=1773970630"},{"product_id":"waveshare-solar-power-manager-embedded-10000mah-li-po-battery-support-6v-24v-solar-panels-19799","title":"Waveshare Solar Power Manager, Embedded 10000mAh Li-Po Battery, Support 6V~24V Solar Panels, 19799","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003eThe Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V rechargeable Li-po battery through solar panel or USB TYPE-C connection, and provides 5V \/ 3A regulated output (with multi protocols support including PD\/QC\/FCP\/PE\/SFCP). \u003cbr\u003eThe module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects. \u003cbr\u003e \u003cbr\u003e1. Support MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel \u003cbr\u003e2. Flexible battery recharging: from solar panel or USB TYPE-C power adapter \u003cbr\u003e3. Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input \u003cbr\u003e4. Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency \u003cbr\u003e5. Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance \u003cbr\u003e6. PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery \u003cbr\u003e7. Several LED indicators, for monitoring the status of solar panel and battery \u003cbr\u003e8. Multi protection circuits: over charge \/ over discharge \/ reverse-proof \/ over heat \/ over current, stable and safe to use\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"19799","offer_id":52628863091035,"sku":"DIY0212B","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0212B.jpg?v=1773970647"},{"product_id":"waveshare-dual-gigabit-ethernet-5g-4g-computer-box-with-cooling-fan-for-raspberry-pi-cm4","title":"Waveshare Dual Gigabit Ethernet 5G\/4G Computer Box with Cooling Fan for Raspberry Pi CM4","description":"1. CM4 Socket: Suitable for all variants of Compute Module 4 \u003cbr\u003e2. Networking:  \u003cbr\u003e- Dual Gigabit Ethernet RJ45 \u003cbr\u003e- M.2 B KEY, for connecting 5G \/ 4G module \u003cbr\u003e- Nano-SIM card slot, supports standard Nano-SIM card for 5G\/4G\/3G\/2G communication \u003cbr\u003e3. USB: USB 3.2 Gen1 x 2 \u003cbr\u003e4. PIN header: Raspberry Pi 40PIN GPIO header \u003cbr\u003e5. Display: MIPI DSI port (15pin 1.0mm FPC connector) \u003cbr\u003e6. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) \u003cbr\u003e7. Video: HDMI x 2, supports 4K 30fps output \u003cbr\u003e8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 \u003cbr\u003e9. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants \u003cbr\u003e10. FAN HEADER: 5V\/12V (12V by default), allows speed adjustment and measurement \u003cbr\u003e11. Power input: 5V\/2.5A \u003cbr\u003e12. Size: 99.6 x 87.0mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"EU Plug","offer_id":52628863451483,"sku":"DIY0217EU","price":127.99,"currency_code":"USD","in_stock":true},{"title":"US Plug","offer_id":52628863484251,"sku":"DIY0217US","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0217EU.jpg?v=1773970668"},{"product_id":"waveshare-industrial-iot-wireless-expansion-module-for-raspberry-pi-cm4","title":"Waveshare Industrial IoT Wireless Expansion Module for Raspberry Pi CM4","description":"\u003cb\u003eAbout The Protuct\u003c\/b\u003e\u003cbr\u003eThis is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G \/ 5G \/ LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces\/resources including RS485, CAN, and RTC. \u003cbr\u003e \u003cbr\u003eCombined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G\/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e1. CM4 socket: For all variants of Compute Module 4 \u003cbr\u003e2. Networking: \u003cbr\u003e- Gigabit Ethernet RJ45 \u003cbr\u003e- M.2 B KEY \/ Mini-PCIe (via adapter), for connecting 5G \/ 4G \/ LoRa wireless module \u003cbr\u003e- Nano-SIM card slot, support standard Nano-SIM card for 5G\/4G\/3G\/2G communication \u003cbr\u003e3. USB: USB 2.0 x 3 \u003cbr\u003e4. PIN header: Non-isolated RS485 x 2, non-isolated CAN x 1, some GPIO pins \u003cbr\u003e5. Camera: MIPI CSI-2 x 1 (15pin 1.0mm FPC connector) \u003cbr\u003e6. Video: HDMI x 1, support 4K 30fps output \u003cbr\u003e7. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 \u003cbr\u003e8. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants \u003cbr\u003e9. Fan header: 5V\/12V, allows speed adjustment and measurement \u003cbr\u003e10. Power input: 5V or 7~36V \u003cbr\u003e11. Dimensions: 145 x 90 x 40mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. CM4-IO-WIRELESS-BASE x 1 \u003cbr\u003e2. PCIe to 4G\/LoRa adapter x 1 \u003cbr\u003e3. Screwdriver x 1 \u003cbr\u003e4. Screws pack x 1 \u003cbr\u003e5. 12V 2A power adapter x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"EU Plug","offer_id":52628864565595,"sku":"DIY0234EU","price":196.99,"currency_code":"USD","in_stock":true},{"title":"US Plug","offer_id":52628864598363,"sku":"DIY0234US","price":196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0234EU.jpg?v=1773970710"},{"product_id":"waveshare-ov5640-af-5mp-usb-camera-module-support-1080p-video-recording-af","title":"Waveshare OV5640 AF 5MP USB Camera Module, Support 1080P Video Recording, AF","description":"1. Pixels: 5MP \u003cbr\u003e2. Sensor: OV5640 \u003cbr\u003e3. Interface: USB 2.0 \u003cbr\u003e4. Camera: Sensor size 1\/4 inch \u003cbr\u003e5. Aperture (F): 2.8 \u003cbr\u003e6. Focal length (EFL): 3.29 mm \u003cbr\u003e7. Field of view (FOV): 68 degree \u003cbr\u003e8. Distortion: Less than 1% \u003cbr\u003e9. Focusing(B): AF Auto-Focus;  \u003cbr\u003e10. Image Format support: MJPG, YUV422 \u003cbr\u003e11. Static image resolution: 2592 x 1944 \u003cbr\u003e12. Video recording: 15 FPS 2592 x 1944, 30 FPS 1920 x 1080, 30 FPS 1280 x 720 \u003cbr\u003e13. Operating voltage: 5V +\/- 5% \u003cbr\u003e14. Camera size: 8.5 x 8.5 mm \u003cbr\u003e15. Module size: 9 x 62 mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"AF","offer_id":52628865024347,"sku":"DIY0245","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0245.jpg?v=1773970723"},{"product_id":"waveshare-ov5640-ff-5mp-usb-camera-module-support-1080p-video-recording-ff","title":"Waveshare OV5640 FF 5MP USB Camera Module, Support 1080P Video Recording, FF","description":"1. Pixels: 5MP \u003cbr\u003e2. Sensor: OV5640 \u003cbr\u003e3. Interface: USB 2.0 \u003cbr\u003e4. Camera: Sensor size 1\/4 inch \u003cbr\u003e5. Aperture (F): 2.8 \u003cbr\u003e6. Focal length (EFL): 3.29 mm \u003cbr\u003e7. Field of view (FOV): 68 degree \u003cbr\u003e8. Distortion: Less than 1% \u003cbr\u003e9. Focusing(C): FF Fixed-Focus \u003cbr\u003e10. Image Format support: MJPG, YUV422 \u003cbr\u003e11. Static image resolution: 2592 x 1944 \u003cbr\u003e12. Video recording: 15 FPS 2592 x 1944, 30 FPS 1920 x 1080, 30 FPS 1280 x 720 \u003cbr\u003e13. Operating voltage: 5V +\/- 5% \u003cbr\u003e14. Camera size: 8.5 x 8.5 mm \u003cbr\u003e15. Module size: 9 x 62 mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"FF","offer_id":52628865352027,"sku":"DIY0246","price":57.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0246.jpg?v=1773970736"},{"product_id":"waveshare-jetson-nano-development-expansion-module-board-base-a","title":"Waveshare Jetson Nano Development \/ Expansion Module Board Base A","description":"1. GPU: 128-core Maxwell \u003cbr\u003e2. CPU: Quad-core ARM A57 1.43 GHz \u003cbr\u003e3. Memory: 4GB 64-bit LPDDR4 25.6 GB\/s \u003cbr\u003e4. Storage: 16GB eMMC (no micro SD card slot) \u003cbr\u003e5. Video encoder: 4K 30, 4x 1080p 30, 9x 720p 30 (H.264\/H.265) \u003cbr\u003e6. Video decoder: 4K 60, 2x 4K 30, 8x 1080p 30, 18x 720p 30 (H.264\/H.265) \u003cbr\u003e7. Camera: 2x MIPI CSI-2 DPHY lanes \u003cbr\u003e8. Connectivity: Gigabit Ethernet, M.2 Key E expansion connector \u003cbr\u003e9. Display: HDMI and DP \u003cbr\u003e10. USB: 4x USB 3.0, USB 2.0 Micro-B \u003cbr\u003e11. Extension interfaces: GPIO, I2C, I2S, SPI, UART \u003cbr\u003e12. Dimensions: 100 x 80 x 29mm \u003cbr\u003e13. Other: 260-pin connector\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628865745243,"sku":"DIY0247","price":120.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0247.jpg?v=1773970752"},{"product_id":"waveshare-imx378-190-fisheye-lens-12-3mp-wider-field-camera-for-raspberry-pi-imx378-190-module","title":"Waveshare IMX378-190 Fisheye Lens 12.3MP Wider Field Camera for Raspberry Pi, IMX378-190 Module","description":"1. Sensor: IMX378 \u003cbr\u003e2. CMOS size:1\/2.3 inch \u003cbr\u003e3. Camera type: Color Pixels: 12.3MP (4056 x 3040) \u003cbr\u003e4. Shutter: Rolling Shutter \u003cbr\u003e5. Aperture: F2.4 \u003cbr\u003e6. Distortion: Less than 58%  \u003cbr\u003e7. Field of vies: 190 degree \u003cbr\u003e8. Focal length: 6.5mm  \u003cbr\u003e8. Focusing: Fixed focus distance\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"IMX378-190 Module","offer_id":52628866138459,"sku":"DIY0248","price":93.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0248.jpg?v=1773970769"},{"product_id":"waveshare-ov9281-120-1mp-mono-camera-module-for-raspberry-pi-global-shutter-ov9281-120-module","title":"Waveshare OV9281-120 1MP Mono Camera Module for Raspberry Pi, Global Shutter, OV9281-120 Module","description":"1. 1MP, global shutter, 120 degree FOV, OV9281-120 mono camera, compatible with Raspberry Pi series boards \u003cbr\u003e2. The global shutter eliminates jello-effect while shooting fast moving objects, more suitable for high frame rate capturing \u003cbr\u003e3. Working with Raspberry Pi, direct connect to Raspberry Pi different variants including 4B \/ 3B+ \/ 3A+ \/ 3B \/ 2B \/ B+ \/ A+, extra FPC cable is equired for Zero \/ Zero 2 W series \u003cbr\u003e \u003cbr\u003eSpecifications: \u003cbr\u003e1. Sensor: OV9281 \u003cbr\u003e2. CMOS size: 1\/4 inch \u003cbr\u003e3. Camera type: Mono \u003cbr\u003e4. Pixels: 1MP (1280 x 800) \u003cbr\u003e5. Shutter: Global Shutter \u003cbr\u003e6. Aperture: F2.5 \u003cbr\u003e7. Distortion: Less than 7.5% \u003cbr\u003e8. Field of vies: 120 degree \u003cbr\u003e9. Focal length: 3.15mm \u003cbr\u003e10. Focusing: Fixed focus \u003cbr\u003e \u003cbr\u003ePackage List:  \u003cbr\u003e1. OV9281-120 Camera x 1 \u003cbr\u003e2. 15-pin FFC (opposite sides contact) x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"OV9281-120 Module","offer_id":52628866924891,"sku":"DIY0263","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0263.jpg?v=1773970799"},{"product_id":"waveshare-poe-ups-base-board-for-raspberry-pi-cm4-gigabit-ethernet-dual-hdmi-quad-usb2-0-poe-ups-base-board","title":"Waveshare PoE UPS Base Board for Raspberry Pi CM4, Gigabit Ethernet, Dual HDMI, Quad USB2.0, PoE UPS Base Board","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e1. PoE UPS Base For CM4: Uninterruptible power supply, powering the CM4 while recharging \u003cbr\u003e2. Connecting With Compute Module 4: Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header. Suitable For Compute Module 4 Lite\/EMMC Series Module \u003cbr\u003e3. Uninterruptible Power: It is able to charge the batteries and provide power output for the system at the same time from external power supply. Automatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble \u003cbr\u003e4. Multi Power Supply Options: \u003cbr\u003e- Three external power supply options: USB interface, wide voltage DC, and PoE \u003cbr\u003e- When connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be in a disconnected status after being fully charged, so as to avoid battery life damaging caused by frequently charging and discharging \u003cbr\u003e- When the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operation \u003cbr\u003e- When the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. When the external power supply is disconnected, it will automatically switch over to batteries output without interrupting the system operation \u003cbr\u003e5. Safe And Stable Circuit Design: Protection circuits for over charge\/discharge, over current, short circuit, and reverse-proof \u003cbr\u003ealong with the standalone resettable fuse for each battery, more safe and stable \u003cbr\u003e6. Real Time Monitoring: Monitoring the batteries voltage, current, power, and remaining capacity via I2C. (When the voltage dips too low, it is possible to save files properly and then shutdown the system by software, to avoid any data loss) \u003cbr\u003e \u003cbr\u003eNote: The 18650 batteries are not included\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e1. CM4 socket: Suitable for all variants of Compute Module 4 \u003cbr\u003e2. Battery support: Parallel 18650 Li-ion battery x 3 (NOT included) \u003cbr\u003e3. Networking: Gigabit Ethernet RJ45 connector, integrates 802.3af-compliant PoE circuit (5V\/2.5A) \u003cbr\u003e4. USB: USB 2.0 Type A ?? 4 \u003cbr\u003e5. Connector:  \u003cbr\u003e- Raspberry Pi 40PIN GPIO header \u003cbr\u003e- M.2 M KEY slot, for connecting NVME SSD, or communication module with PCIE M.2 M KEY interface \u003cbr\u003e6. Display: MIPI DSI port x 1 (22pin 0.5mm FPC connector) \u003cbr\u003e7. Camera: MIPI CSI-2 port x 2 (22pin 0.5mm FPC connector) \u003cbr\u003e8. Video: HDMI x 2, supports 4K 30fps output \u003cbr\u003e9. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 \u003cbr\u003e10. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants \u003cbr\u003e11. Fan: Allows speed adjustment and measurement, 5V \/ 12V \u003cbr\u003e12. Indicator: \u003cbr\u003e- M.2 status LED \u003cbr\u003e- CM4 status LED \u003cbr\u003e13. Power input7-36V \u003cbr\u003e14. Dimensions: 175.0 x 108.0mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"PoE UPS Base Board","offer_id":52628867449179,"sku":"DIY0269","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0269.jpg?v=1773970815"},{"product_id":"waveshare-rail-mount-serial-server-rs485-to-wifi-ethernet-module-modbus-mqtt-gateway-21968","title":"Waveshare Rail-Mount Serial Server RS485 to WIFI\/Ethernet Module, Modbus MQTT Gateway, 21968","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003eThis is a RS485 device data acquisitor \/ IoT gateway designed for industrial environment. It combines multi functions in one, including serial server, Modbus gateway, MQTT gateway, RS485 to HTTPD Client, etc. With RS485, WIFI and Ethernet ports, the module can realize functions such as serial to WIFI, serial to Ethernet, Ethernet to WIFI and so on. Using screw terminals for power input, it supports 5~36V wide range power supply. Rail-mount V0 flame-retardant case design, small in size, easy to install. It is suitable for applications like data acquisition, IoT gateway, safety \u0026amp; security IoT, and intelligent instrument monitoring...\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003eOutline: \u003cbr\u003e1. Communication interface: RS485, screw terminal \u003cbr\u003e2. Power supply: 5 ~ 36V DC, screw terminal \u003cbr\u003e3. Case: PC + ABS, V0 flame retardant grade \u003cbr\u003e4. Dimensions: L x W x H: 109.66 x 28 x 64.71 mm \u003cbr\u003e \u003cbr\u003eComunication: \u003cbr\u003e1. Ethernet: 10 \/ 100M auto-negotiation RJ45 connector \u003cbr\u003e2. WIFI: 802.11b\/g\/n compliant \u003cbr\u003e3. Serial port: RS485 interface (Anti-surge, Lightningproof, Over-current protection) \u003cbr\u003e \u003cbr\u003eWireless specification: \u003cbr\u003e1. Frequency Band: 2.412 ~ 2.484 GHz \u003cbr\u003e2. Wireless network: Station \/ AP \/ AP+Station Mode \u003cbr\u003e3. Security mechanism: WPA-PSK \/ WPA2-PSK \u003cbr\u003e4. Encryption type: TKIP \/ AES \u003cbr\u003e5. Transmitting power:  \u003cbr\u003e- 802.11b: +19dBm (11Mbps) \u003cbr\u003e- 802.11g: +18dBm (54Mbps) \u003cbr\u003e- 802.11n: +17dBm (HT20, MCS7); +17dBm (HT40, MCS7) \u003cbr\u003e6. Receiving sensitivity: \u003cbr\u003e- 802.11b: -89dBm (11Mbps) \u003cbr\u003e- 802.11g: -81dBm (54Mbps) \u003cbr\u003e- 802.11n: -73dBm (HT20, MCS7); -71dBm (HT40, MCS7) \u003cbr\u003e \u003cbr\u003eSerial specification: \u003cbr\u003e1. Baudrate: 300 ~ 460800 bps \u003cbr\u003e2. Parity bit: None, odd, even, mark, space \u003cbr\u003e3. Data bit: 5 ~ 9 bits \u003cbr\u003e4. Flow control: N\/A \u003cbr\u003e \u003cbr\u003eSoftware \u003cbr\u003e1.Protocol: TCP \/ UDP \/ ARP \/ ICMP \/ DHCP \/ DNS \/ HTTP \/ MQTT \u003cbr\u003e2. Configuration: Host, web browser, serial AT command \u003cbr\u003e3. Communication method: TCP\/IP direct communication, VCOM \u003cbr\u003e4. Operating mode: Transparent transmission, serial command, HTTPD Client, Modbus TCP to Modbus RTU \u003cbr\u003e \u003cbr\u003eEnvironmental requirements \u003cbr\u003e1. Working temperature: -40 ~ 85 degree C \u003cbr\u003e2. Storage temperature: -45 ~ 125 degree C \u003cbr\u003e3. Humidity range: 5% ~ 95% relative humidity\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. RS485 TO WIFI\/ETH x 1 \u003cbr\u003e2. Antenna x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"21968","offer_id":52628867940699,"sku":"DIY0282","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0282.jpg?v=1773970834"},{"product_id":"waveshare-industrial-5p-gigabit-ethernet-switch-full-duplex-10-100-1000m-din-rail-mount","title":"Waveshare Industrial 5P Gigabit Ethernet Switch, Full-Duplex 10\/100\/1000M, DIN Rail Mount","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e1. Onboard switch chip, 5x ports 10\/100\/1000M non-blocking switch architecture \u003cbr\u003e2. Full-duplex 10\/100\/1000M support for each port (the half-duplex 100M connection is only supported on 10\/100M mode) \u003cbr\u003e3. Full\/Half-duplex operations with IEEE 802.3x flow control and back pressure support \u003cbr\u003e4. Allow forwarding 9216 bytes huge data packet on linear speed \u003cbr\u003e5. Over-voltage protection, effectively preventing damages caused by other high voltage power supply \u003cbr\u003e6. Industrial grade alloy case, solid and durable, with DIN rail mount support for easy installing \u003cbr\u003e7. 5~36V wide voltage power supply, dual power interface (DC interface and terminal block) onboard overvoltage protection, reverse connection protection. \u003cbr\u003e8. Support 25mm standard rail.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. Gigabit-Switch-5P x 1 \u003cbr\u003e2. Power supply screw terminal x 1 \u003cbr\u003e3. 12V 1A power adapter x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52628868432219,"sku":"DIY0288","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0288.jpg?v=1773970850"},{"product_id":"waveshare-flexible-rgb-full-color-led-matrix-panel-2-5mm-pitch-96x48-pixels-adjustable-brightness-bendable-pcb-23709","title":"Waveshare Flexible RGB Full-color LED Matrix Panel, 2.5mm Pitch, 96x48 Pixels, Adjustable Brightness Bendable PCB, 23709","description":"\u003cbr\u003e1. Pixel: 96 x 48=4608 dots\u003cbr\u003e2. Pitch: 2.5mm\u003cbr\u003e3. Pixel format: 1R1G1B\u003cbr\u003e4. Viewing angle: greater than 140 degrees\u003cbr\u003e5. Control mode: synchronous\u003cbr\u003e6. Drive: 1\/16 scan\u003cbr\u003e7. Connector: HUB75\u003cbr\u003e8. Power supply: 5V \/ 2.5A (VH4 connector input)\u003cbr\u003e9. Power: within 20W\u003cbr\u003e10. Size: 24 x 12cm\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. 4608 independent RGB led, full color display, brightness adjustable\u003cbr\u003e2. 96x48 pixels, 2.5mm pitch, allows displaying text, color image or animation\u003cbr\u003e3. 240x120mm size, moderate size, suitable for DIY desktop display or wall mount display\u003cbr\u003e4. Two HUB75 headers on board, 1 for controller data input, 1 output, chain support\u003cbr\u003e5. Flexible PCB material, can be gently bent, suitable for some application scenarios such as cylinders, spheres and other curved surfaces\u003cbr\u003e6. Provide open source development resources (for Raspberry Pi \/ Raspberry Pi Pico \/ ESP32 \/ Arduino, etc.)\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"23709","offer_id":52629277180251,"sku":"TBD01350857","price":60.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD01350857.jpg?v=1773978136"},{"product_id":"qfn32-0-5-burning-seat-chip-test-seat-flip-shrapnel-double-layer-board-programming-seat-qfn32-0-5","title":"QFN32-0.5 Burning Seat Chip Test Seat Flip Shrapnel Double-Layer Board Programming Seat, QFN32-0.5","description":"\u003cbr\u003e1. Working frequency: high frequency\u003cbr\u003e2. Application range: integrated circuit IC\u003cbr\u003e3. Production process: injection molding\u003cbr\u003e4. Contact material: beryllium copper shrapnel\u003cbr\u003e5. Insulator material: PPS PET\u003cbr\u003e6. Number of cores: 32\u003cbr\u003e7. Name: QFN32 flip shrapnel to 152 test seat\u003cbr\u003e8. Purpose: programming socket and test socket, to program and test QFN32 IC chips\u003cbr\u003e9. Chip size: 5x5cm\u003cbr\u003e10. Pin spacing: 0.5mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"QFN32-0.5","offer_id":52629286355291,"sku":"TBD05508777","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD05508777.jpg?v=1773978505"},{"product_id":"emcp221-flip-shrapnel-to-usb-test-socket-burn-socket","title":"EMCP221 Flip Shrapnel To USB Test Socket Burn Socket","description":"\u003cbr\u003e1. Type: Test block\u003cbr\u003e2. Working frequency: High frequency\u003cbr\u003e3. Application: integrated circuit IC\u003cbr\u003e4. Interface type: Terminal\u003cbr\u003e5. Production process: Injection molding\u003cbr\u003e6. Features: Stable testing\u003cbr\u003e7. Contact material: Beryllium copper shrapnel\u003cbr\u003e8. Insulator material: PET\u003cbr\u003e9. Number of cores: 38\u003cbr\u003e10. Purpose: Programming socket, test socket, to test, read and write the IC chip of EMCP221\u003cbr\u003e11. Lead spacing: 0.5mm\u003cbr\u003e12. Service life: 100,000 times\u003cbr\u003e13. Chip size: 11.5x13cm\u003cbr\u003e\u003cbr\u003eTesting Method:\u003cbr\u003e1. Select the limit frame that matches the IC, and place the IC flat in the SOCKET according to the direction\u003cbr\u003e2. Plug the USB cable into the USB port of the computer, turn on the power switch of the socket, and select the corresponding test program\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. Also compatible with 186-FBGA 162-FBGA\u003cbr\u003e2. The shrapnel is made of imported beryllium copper by high-precision die stamping, and the head-shaped probe is designed to be hardened and thickened in the later stage to ensure product stability and durability.\u003cbr\u003e3. Support hot plugging and separate power switch, support for testing through USB interface or connection with the board on the board according to the PIN\u003cbr\u003e4. Using floating board structure, precise positioning, convenient IC picking and placement, higher work efficiency\u003cbr\u003e5. The test board is welded to the adapter board, the test socket does not need to be soldered, and the pinholes are inserted into the adapter board\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52629286977883,"sku":"TBD05517572","price":206.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD05517572.jpg?v=1773978517"},{"product_id":"emcp162-168-flip-shrapnel-to-usb-test-socket-emcp-programming-socket-mobile-phone-font-read-write-socket","title":"EMCP162\/168 Flip Shrapnel To USB Test Socket EMCP Programming Socket Mobile Phone Font Read-Write Socket","description":"\u003cbr\u003e1. Type: test block\u003cbr\u003e2. Working frequency: high frequency\u003cbr\u003e3. Application: integrated circuit IC\u003cbr\u003e4. Interface type: terminal\u003cbr\u003e5. Production process: injection molding\u003cbr\u003e6. Features: stable testing\u003cbr\u003e7. Contact material: beryllium copper shrapnel\u003cbr\u003e8. Insulator material: PET\u003cbr\u003e9. Number of cores: 17\u003cbr\u003e10. Purpose: programming socket, test socket, for testing, reading and writing of EMCP IC chips\u003cbr\u003e11. Lead spacing: 0.5mm\u003cbr\u003e12. Service life: 100,000 times\u003cbr\u003e\u003cbr\u003eTesting method:\u003cbr\u003e1. Select the limit frame that matches the IC, and place the IC flat in the SOCKET according to the direction\u003cbr\u003e2. Plug the USB cable into the USB port of the computer, turn on the power switch of the socket, and select the corresponding test program\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. Also compatible with 186-FBGA 162-FBGA\u003cbr\u003e2. The shrapnel is made of imported beryllium copper by high-precision die stamping, and the head-shaped probe is designed to be hardened and thickened in the later stage to ensure product stability and durability.\u003cbr\u003e3. Support hot plugging and separate power switch, support for testing through the USB interface or through the connection with the board on the board corresponding to the PIN\u003cbr\u003e4. Using floating board structure, precise positioning, convenient IC picking and placement, higher work efficiency\u003cbr\u003e5. The test board is welded to the adapter board, the test socket does not need to be soldered, and the pinholes are inserted into the adapter board\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52629287108955,"sku":"TBD05517577","price":203.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD05517577.jpg?v=1773978527"},{"product_id":"emmc153-emmc169-flip-shrapnel-to-sd-interface-test-socket-burning-socket-for-data-recovery-mobile-phone-repair","title":"EMMC153 EMMC169 Flip Shrapnel To SD Interface Test Socket Burning Socket for Data Recovery Mobile Phone Repair","description":"\u003cbr\u003e1. Type: Test block\u003cbr\u003e2. Interface type: SD\u003cbr\u003e3. Application: Integrated circuit IC\u003cbr\u003e4. Test method:\u003cbr\u003eA. Select the limit frame that matches the IC, and place the IC flat in the SOCKET according to the direction\u003cbr\u003eB. Insert the SD interface into the card reader and then connect to the computer, select the corresponding test program\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e1. SOCKET is compatible with the ball and no ball test, and the IC limit frame can be replaced. Compared with similar products, it has a long service life and wide versatility.\u003cbr\u003e2. Compatible with 169-FBGA 153-FBGA at the same time\u003cbr\u003e3. The shrapnel is made of imported beryllium copper by high-precision die stamping, and the head shape is imitated by the probe design, and the latter is hardened and thickened with gold plating to ensure product stability and durability\u003cbr\u003e4. The contact module adopts an overall structure to reduce the problem of repeated positioning, ensure that its contact point is accurately aligned with the IC PAD, and has a high pass rate in one test\u003cbr\u003e5. Use welding structure to ensure good contact and stable testing\u003cbr\u003e6. Flip cover structure, more convenient for manual testing, convenient and simple operation\u003cbr\u003e7. The pressure IC adopts a mold integral molding and a spring self-adaptive structure to ensure that ICs of different thicknesses do not need any adjustments to have good contact. The tested ICs are versatile (the thickness range of 0.6-2.0MM can be tested)\u003cbr\u003e8. The structure adopts injection molding, precise positioning, convenient access to IC, and higher work efficiency\u003cbr\u003e\u003cbr\u003eRepair and maintenance:\u003cbr\u003e1. Use an air gun or anti-static brush to remove impurities in the SOCKET seat to make it contact well;\u003cbr\u003e2. Clean the SOCKET with absolute alcohol to clean the attached impurities on the top of the shrapnel and make it contact well;\u003cbr\u003e3. If you find that the shrapnel inside the SOCKET is burned or broken, please purchase the corresponding SOCKET to replace it;\u003cbr\u003e4. It cannot be detected when the USB interface is plugged in. Please check whether the power switch is turned on or whether the computer USB connection is normal;\u003cbr\u003e5. It is strictly forbidden to soak and clean with organic solvents such as thinner water and board washing water to avoid damage to the internal structure of SOCKET;\u003cbr\u003e6. When not in use for a long time, please seal it with an anti-static bag to prevent dust from falling in and affect the product test performance.\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52629287174491,"sku":"TBD05519928","price":157.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD05519928.jpg?v=1773978538"},{"product_id":"qfp48-0-5-qfp48-to-dip48-burning-seat-test-seat-programming-seat-qfp48-0-5","title":"QFP48-0.5 QFP48 To DIP48 Burning Seat Test Seat Programming Seat, QFP48-0.5","description":"\u003cbr\u003e1. Product use: Programming socket, test socket, programming and testing of QFP48 IC chips\u003cbr\u003e2. Applicable packages: QFP48, PQFP48, QFP48, pin pitch 0.5 mm\u003cbr\u003e3. Features: All pins are led out in the order of the chip\u003cbr\u003e4. Pin spacing: 0.5 mm\u003cbr\u003e5. Foot position: 48\u003cbr\u003e6. Chip size: 7x7 mm (with pins 9x9 mm)\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"QFP48-0.5","offer_id":52629287207259,"sku":"TBD05541244","price":65.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD05541244.jpg?v=1773978551"},{"product_id":"qfn44-0-5-flip-shrapnel-burn-socket-test-socket-programmer-qfn44-0-5","title":"QFN44-0.5 Flip Shrapnel Burn Socket Test Socket Programmer, QFN44-0.5","description":"\u003cbr\u003e1. Number of cores: 44\u003cbr\u003e2. Features: U-shaped thimble, more stable contact\u003cbr\u003e3. Purpose: Programming socket, test socket, test, read and write on QFN44 IC chip\u003cbr\u003e4. Working frequency: High frequency\u003cbr\u003e5. Production process: Injection molding\u003cbr\u003e6. Application: Integrated Circuit IC\u003cbr\u003e7. Contact material: Beryllium copper shrapnel\u003cbr\u003e8. Insulator material: PPS\/PET\u003cbr\u003e9. Chip size: 7x7cm\u003cbr\u003e10. Pin spacing: 0.5mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"QFN44-0.5","offer_id":52629287600475,"sku":"TBD05546852","price":111.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD05546852.jpg?v=1773978585"},{"product_id":"waveshare-alphabot2-robot-building-kit-for-arduino-no-arduino-controller-for-arduino-no-arduino-controller","title":"Waveshare AlphaBot2 Robot Building Kit for Arduino (no Arduino Controller), For Arduino (no Arduino Controller)","description":"\u003cb\u003eOverview\u003cbr\u003e\u003c\/b\u003eThis AlphaBot2 robot kit is designed to use with an Arduino compatible controller (not included). It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, infrared remote control, Bluetooth communication, etc.\u003cbr\u003e\u003cbr\u003eThanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAlphaBot2 Features\u003cbr\u003e\u003c\/b\u003eAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.\u003cbr\u003eAlphaBot2-Base, the lower base chassis:\u003cbr\u003e1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking\u003cbr\u003e2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring\u003cbr\u003e3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating\u003cbr\u003e4. N20 micro gear motor, with metal gears, low noise, high accuracy\u003cbr\u003e5. Onboard RGB LEDs, true color lighting, pretty cool\u003cbr\u003e\u003cbr\u003eAlphaBot2-Ar, the upper adapter board for controller:\u003cbr\u003e1. Onboard Arduino interface, into which Arduino controller can be directly plugged\u003cbr\u003e2. 0.96inch 128x64 yellow\/blue dual color OLED\u003cbr\u003e3. TLC1543 AD acquisition chip\u003cbr\u003e4. PC8574 I\/O expander, avoid I\/O shortage\u003cbr\u003e5. Xbee connector, for connecting dual-mode Bluetooth module\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Contents\u003cbr\u003e\u003c\/b\u003e1. AlphaBot2-Ar (adapter board) x1\u003cbr\u003e2. AlphaBot2-Base (base chassis) x1\u003cbr\u003e3. Ultrasonic sensor x1\u003cbr\u003e4. IR remote controller x1\u003cbr\u003e5. FC-20P cable 8cm x1\u003cbr\u003e6. USB type A plug to micro B plug cable x1\u003cbr\u003e7. AlphaBot2-Ar screws x1\u003cbr\u003e8. Screwdriver x1 (Extra Free)\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"For Arduino (no Arduino Controller)","offer_id":52629315944795,"sku":"ZY13869155","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY13869155.jpg?v=1773979749"},{"product_id":"waveshare-alphabot2-robot-building-kit-for-raspberry-pi-3-model-b-no-pi-for-raspberry-pi-3-model-b-no-pi","title":"Waveshare AlphaBot2 Robot Building Kit For Raspberry Pi 3 Model B (No Pi), For Raspberry Pi 3 Model B (No Pi)","description":"\u003cb\u003eOverview\u003cbr\u003e\u003c\/b\u003eThis AlphaBot2 robot kit is designed to use with Raspberry Pi 3 Model B (not included). It features rich common robot functions including line tracking, obstacle avoiding, Bluetooth\/infrared\/WiFi remote control, video monitoring, etc.\u003cbr\u003e\u003cbr\u003eThanks to the highly integrated modular design, it is fairly easy to assemble by a snap, no soldering, no wiring. After a few minutes spent on hardware assembing, youre almost there, our open source demo codes is ready to help you get started fast.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAlphaBot2 Features\u003cbr\u003e\u003c\/b\u003eAlphaBot2 employs a 2-layer structure to provide excellent stability and compatibility.\u003cbr\u003e\u003cbr\u003eAlphaBot2-Base, the lower base chassis:\u003cbr\u003e1. 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking\u003cbr\u003e2. Onboard modules like line tracking, obstacle avoiding, needs no messy wiring\u003cbr\u003e3. TB6612FNG dual H-bridge motor driver, compared with L298P, its more efficient, more compact, and less heating\u003cbr\u003e4. 5Onboard RGB LEDs, true color lighting, pretty cool\u003cbr\u003e\u003cbr\u003eAlphaBot2-Pi, the upper adapter board for controller:\u003cbr\u003e1. LM2596 voltage regulator, provides the Pi with stable 5V power\u003cbr\u003e2. TLC1543 AD acquisition chip, allows the Pi to use analog sensors\u003cbr\u003e3. PCA9685 servo controller, make it more smoothly to rotate the pan head\u003cbr\u003e4. CP2102 UART converter, easy for controlling the Pi via UART\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"For Raspberry Pi 3 Model B (No Pi)","offer_id":52629316763995,"sku":"ZY13869584","price":172.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY13869584.jpg?v=1773979766"},{"product_id":"waveshare-xcore407i-stm32f4-core-board","title":"Waveshare XCore407I, STM32F4 Core Board","description":"Overview\u003cbr\u003e1. XCore407I is an STM32 MCU core board that features the STM32F407IGT6 on board.\u003cbr\u003e2. Clock circuit, USB power management\u003cbr\u003e3. Onboard devices: USB HS PHY, Ethernet PHY, 1G Bit NandFlash\u003cbr\u003e4. Connectors：USB HS (mini \/ type A), USB FS (mini), Ethernet (RJ45)\u003cbr\u003e5. All the idle I\/O ports are accessible on the pin headers\u003cbr\u003e6. 2.0mm pin header pitch, smaller size, easier to integrate into user system\u003cbr\u003e7. Note : please consider the EVK407I, which supports easily programing\/debugging.\u003cbr\u003e\u003cbr\u003eWhat is On Board\u003cbr\u003eSTM32F407IGT6 development board on board resource\u003cbr\u003e\u003cbr\u003e1. STM32F407IGT6: The high performance STM32 MCU which features:\u003cbr\u003e- Core: Cortex-M4 32-bit RISC\u003cbr\u003e- Feature: a full set of single-cycle DSP instructions\u003cbr\u003e- Operating Frequency: 168MHz, 210 DMIPS\/1.25 DMIPS\/MHz\u003cbr\u003e- Operating Voltage: 1.8V-3.6V\u003cbr\u003e- Package: LQFP176\u003cbr\u003e- Memories: 1024kB Flash, 192+4kB SRAM\u003cbr\u003e- MCU communication Interfaces:\u003cbr\u003e-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C\u003cbr\u003e-- 1 x FSMC, 1 x SDIO, 2 x CAN\u003cbr\u003e-- 1 x USB 2.0 high-speed\/full-speed device\/host\/OTG controller with dedicated DMA, ULPI and on-chip full-speed PHY\u003cbr\u003e-- 1 x 10\/100 Ethernet MAC\u003cbr\u003e-- 1 x 8 to 14-bit parallel camera interface\u003cbr\u003e- AD \u0026amp; DA converters: 3 x AD (12-bit, 1μs, shares 24 channels); 2 x DA (12-bit)\u003cbr\u003e- Debugging\/Programming: supports JTAG\/SWD (serial wire debug) interfaces, supports IAP\u003cbr\u003e2. MIC2075-2, onboard USB FS power management device\u003cbr\u003e3. AMS1117-3.3, 3.3V voltage regulator\u003cbr\u003e4. K9F1G08U0E, 1G Bit NandFlash\u003cbr\u003e5. DP83848, Ethernet PHY\u003cbr\u003e6. MIC2075-1, onboard USB HS power management device\u003cbr\u003e7. USB3300, USB HS PHY\u003cbr\u003e8. Power supply switch, powered from 5Vin or USB connection\u003cbr\u003e9. Boot mode switch, for configuring BOOT0 pin\u003cbr\u003e10. Power indicator\u003cbr\u003e11. USB FS LED\u003cbr\u003e12. USB HS LED\u003cbr\u003e13. Reset button\u003cbr\u003e14. 8M crystal, MCU clock, enables the MCU run at higher speed by frequency multiplication\u003cbr\u003e15. 24M crystal, USB3300 clock\u003cbr\u003e16. 50M crystal, DP83848 clock\u003cbr\u003e17. 32.768K crystal, for internal RTC with calibration\u003cbr\u003e18. Ethernet connector\u003cbr\u003e19. USB FS mini connector\u003cbr\u003e20. USB HS mini connector\u003cbr\u003e21. USB HS type A connector\u003cbr\u003e22. MCU pins expander, VCC, GND and all the idle I\/O ports are accessible on expansion connectors for further expansion\u003cbr\u003e23. USB OTG\/HOST jumper\u003cbr\u003e24. VREF\/VBAT jumper\u003cbr\u003e25. Ethernet I\/O selection solder joint\u003cbr\u003e26. USB HS I\/O selection solder joint\u003cbr\u003e27. PDR selection solder joint: 1.8-3.6V, -40～105℃ OR 1.7-3.6V, 0～70℃\u003cbr\u003e\u003cbr\u003ePackage Contents\u003cbr\u003e1. XCore407I development board x 1\u003cbr\u003e2. USB type A to Mini-B cable x 1\u003cbr\u003e3. Software CD x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52629316993371,"sku":"ZY13988205","price":93.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY13988205.jpg?v=1773979778"},{"product_id":"waveshare-core405r-stm32f4-core-board","title":"Waveshare Core405R, STM32F4 Core Board","description":"Overview\u003cbr\u003e1. Core405R is an STM32 MCU core board designed for STM32F405RGT6, supports further expansion. It is ideal for starting application development with STM32F family.\u003cbr\u003e2. Minimal ready-to-run system, integrates clock circuit, USB control circuit, USB connector, 3. etc.\u003cbr\u003e3. All the I\/O ports are accessible on the pin headers\u003cbr\u003e4. JTAG\/SWD programming\/debugging interface\u003cbr\u003e5. 2.54mm header pitch, allowed to be plugged-in your application board\u003cbr\u003e\u003cbr\u003eWhat has On Board\u003cbr\u003e1. STM32F405RGT6: The high performance STM32 MCU which features:\u003cbr\u003e- Core: Cortex-M4 32-bit RISC\u003cbr\u003e- Operating Frequency: 168MHz, 210 DMIPS\/1.25 DMIPS\/MHz\u003cbr\u003e- Operating Voltage: 1.8V-3.6V\u003cbr\u003e- Package: LQFP64\u003cbr\u003e- Memories: 1MB Flash, 192+4kB SRAM\u003cbr\u003e- MCU communication Interfaces:\u003cbr\u003e-- 3 x SPI, 4 x USART, 2 x UART, 2 x I2S, 3 x I2C, 1 x SDIO, 2 x CAN\u003cbr\u003e--1 x USB 2.0 HS\/FS device\/host\/OTG controller with dedicated DMA, on-chip full-speed PHY\u003cbr\u003e--1 x USB HS ULPI (external PHY required)\u003cbr\u003e- AD \u0026amp; DA converters: 3 x AD (12-bit, 1μs, shares 16 channels); 2 x DA (12-bit)\u003cbr\u003e- Debugging\/Programming: supports JTAG\/SWD (serial wire debug) interfaces, supports IAP\u003cbr\u003e2. AMS1117-3.3: 3.3V voltage regulator\u003cbr\u003e3. MIC2075-2: onboard USB power management device\u003cbr\u003e4. Power supply switch, powered from 5Vin or USB connection\u003cbr\u003e5. Boot mode selection, for configuring BOOT0 pin\u003cbr\u003e6. Power indicator\u003cbr\u003e7. VBUS LED\u003cbr\u003e8. Reset button\u003cbr\u003e9. 8M crystal\u003cbr\u003e10. 32.768K crystal, for internal RTC with calibration\u003cbr\u003e11. JTAG\/SWD interface: for debugging\/programming\u003cbr\u003e12. USB connector, used for establishing USB communication between PC and the STM32 development board\u003cbr\u003e13. MCU pins expander, VCC, GND and all the I\/O pins are accessible on expansion connectors for further expansion\u003cbr\u003e14. 5Vin pinheader, 5V power supply is required when using USB HOST\/OTG\u003cbr\u003e15. USB jumper\u003cbr\u003e- Short the jumper when using USB\u003cbr\u003e- Open the jumper to disconnect from related I\/O port\u003cbr\u003e16. VBAT selection jumper\u003cbr\u003e- Short the jumper to use system power supply\u003cbr\u003e- Open the jumper to connect the VBAT to external power, such as battery\u003cbr\u003e\u003cbr\u003ePackage  Contents\u003cbr\u003e1. Core405R x 1\u003cbr\u003e2. USB type A to Mini-B cable x 1\u003cbr\u003e3. Software CD x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52629317157211,"sku":"ZY13991230","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY13991230.jpg?v=1773979790"},{"product_id":"waveshare-nucleo-l476rg-stm32-nucleo-64-development-board-11307","title":"Waveshare NUCLEO-L476RG, STM32 Nucleo-64 Development Board, 11307","description":"\u003cb\u003eNUCLEO-L476RG Description\u003cbr\u003e\u003c\/b\u003eThe STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino? connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.\u003cbr\u003e\u003cbr\u003eThe STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK\/V2-1 debugger and programmer.\u003cbr\u003e\u003cbr\u003eThe STM32 Nucleo board comes with the STM32 comprehensive software HAL library together with various packaged software examples, as well as direct access to mbed online resources.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNUCLEO-L476RG Key Features\u003cbr\u003e\u003c\/b\u003eSTM32 microcontroller with LQFP64 package\u003cbr\u003eTwo types of extension resources\u003cbr\u003eArduino Uno Revision 3 connectivity\u003cbr\u003eSTMicroelectronics Morpho extension pin headers for full access to all STM32 I\/Os\u003cbr\u003embed-enabled (http:\/\/mbed.org)\u003cbr\u003eOn-board ST-LINK\/V2-1 debugger\/programmer with SWD connector\u003cbr\u003eselection-mode switch to use the kit as a standalone ST-LINK\/V2-1\u003cbr\u003eFlexible board power supply\u003cbr\u003eUSB VBUS or external source(3.3 V, 5 V, 7 - 12 V)\u003cbr\u003ePower management access point\u003cbr\u003eThree LEDs\u003cbr\u003eUSB communication (LD1), user LED (LD2), power LED (LD3)\u003cbr\u003eTwo push buttons: USER and RESET\u003cbr\u003eUSB re-enumeration capability: three different interfaces supported on USB\u003cbr\u003eVirtual Com port\u003cbr\u003eMass storage\u003cbr\u003eDebug port\u003cbr\u003eSupported by wide choice of Integrated Development Environments (IDEs) including IAR?, Keil?, GCC-based IDEs\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"11307","offer_id":52629318500699,"sku":"ZY14201912","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY14201912.jpg?v=1773979819"},{"product_id":"platform-cable-usb-programmer-debugger-for-xilinx-devices","title":"Platform Cable USB, Programmer \u0026 Debugger for Xilinx Devices","description":"USB compatible cable for in-circuit configuration and programming of all Xilinx devices\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOverview\u003cbr\u003e\u003c\/b\u003eThe Platform Cable USB a USB compatible cable for in-circuit configuration and programming of all Xilinx devices. It is compatible with the original XILINX Platform Cable USB.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003cbr\u003e\u003c\/b\u003e- Performance\u003cbr\u003e1. Using CY7C68013A+FPGA solution, fully compatible with the original XILINX Platform Cable USB\u003cbr\u003e2. Programs all Xilinx devices, including FPGAs \/ CPLDs \/ ISP Configuration PROMs\u003cbr\u003e3. Supports JTAG, Slave-Serial and SPI programming, to config all Xilinx devices\u003cbr\u003e4. Interfaces to devices operating at 5V \/ 3.3V \/ 2.5V \/ 1.8V \/ 1.5V\u003cbr\u003e5. Optional target clock frequency, supports XILINX software automatic frequency adjustment\u003cbr\u003e6. Firmware auto upgrade, its possible to support more new released software and devices\u003cbr\u003e7. Anti-static and multi-layers signal isolation, to protect the target and the programmer itself\u003cbr\u003e\u003cbr\u003e- Supported software\u003cbr\u003e1. Xilinx ISE\u003cbr\u003e2. iMPACT\u003cbr\u003e3. ChipScope\u003cbr\u003e4. Vivado\u003cbr\u003e\u003cbr\u003e- Supported devices\u003cbr\u003e1. Xilinx FPGA devices: UltraScale \/ 7 series \/ Zynq \/ Kintex \/ Virtex \/ Artix \/ Spartan, etc.\u003cbr\u003e2. Xilinx CPLD devices: XC9500 \/ XC9500XL \/ XC9500XV \/ CoolRunner XPLA3 \/ CoolRunner-II, etc.\u003cbr\u003e3. Xilinx PROM devices: Platform Flash XCF00S \/ XCF00P \/ XL, etc.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eLED Status\u003cbr\u003e\u003c\/b\u003e1. Red: USB connected\u003cbr\u003e2. Yellow: USB connected, and Vref (the target board) is powered\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHow to Connect\u003cbr\u003e\u003c\/b\u003e1. Connects to PC: Via USB interface\u003cbr\u003e2. Connects to target board: Platform Cable USB provides 3 different interfaces to connect with the target board: JTAG, Slave Serial, and SPI. The figure below shows the header pinouts of the interfaces:\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage contents\u003cbr\u003e\u003c\/b\u003e1. Platform Cable USB main unit x1\u003cbr\u003e2. JTAG adapter x1\u003cbr\u003e3. USB cable x1\u003cbr\u003e4. 8-pin header to 7-pin separated cable x1\u003cbr\u003e5. 8-pin header to 6-pin header cable x1\u003cbr\u003e6. 14-pin (2.54mm pitch) JTAG cable x1\u003cbr\u003e7. 14-pin (2mm pitch) JTAG cable x1\u003cbr\u003e8. 10-pin (2.54mm pitch) JTAG cable x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52629318533467,"sku":"ZY14251095","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY14251095.jpg?v=1773979827"},{"product_id":"waveshare-st-link-v2-en-stm-programmers-debuggers","title":"Waveshare ST-LINK\/V2 (EN), STM Programmers \u0026 Debuggers","description":"\u003cb\u003eDescription\u003cbr\u003e\u003c\/b\u003e1. The ST-LINK\/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG\/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.\u003cbr\u003e2. STM8 applications use the USB full speed interface to communicate with STMicroelectronics ST Visual Develop (STVD) or ST Visual Program (STVP) software.\u003cbr\u003e3. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eKey Features\u003cbr\u003e\u003c\/b\u003e1. 5V power supplied by a USB connector\u003cbr\u003e2. USB 2.0 full speed compatible interface\u003cbr\u003e3. USB standard A to mini B cable\u003cbr\u003e4. SWIM specific features\u003cbr\u003e5. 1.65 V to 5.5 V application voltage supported on SWIM interface\u003cbr\u003e6. SWIM low-speed and high-speed modes supported\u003cbr\u003e7. SWIM programming speed rate: 9.7 Kbytes\/s in low speed and 12.8 Kbytes\/s in high speed\u003cbr\u003e8. SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector\u003cbr\u003e9. SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector\u003cbr\u003e10. JTAG specific features\u003cbr\u003e11. 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs\u003cbr\u003e12. JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector\u003cbr\u003e13. Direct firmware update feature supported (DFU)\u003cbr\u003e14. Status LED which blinks during communication with the PC\u003cbr\u003e15. Operating temperature 0 to 50 °C\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplication Example\u003cbr\u003e\u003c\/b\u003eConnecting the PC and STM8\/STM32 application board through ST-LINK\/V2 to establish hardware connection\u003cbr\u003e\u003cbr\u003e\u003cb\u003eConnection with STM8 applications\u003cbr\u003e\u003c\/b\u003eThe ST-LINK\/V2 should be connected to the STM8 application via the SWIM cable. Two SWIM cables are delivered with the product:\u003cbr\u003e- SWIM flat ribbon with a standard ERNI connector at one end and a 4-pin connector at the other end\u003cbr\u003e- SWIM flat ribbon ended with a 4-pin, 2.54 mm, low-cost connector on two sides\u003cbr\u003e\u003cbr\u003e\u003cb\u003eConnection with STM32 applications\u003cbr\u003e\u003c\/b\u003eFor STM32 developments the ST-LINK\/V2 must be connected to the application using the standard 20-pin female-female JTAG flat ribbon provided.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eST-LINK\/V2 Status\u003cbr\u003e\u003c\/b\u003eThe LED labeled COM on top of the ST-LINK\/V2 shows the ST-LINK\/V2 status (whatever the connection type). When the:\u003cbr\u003e1. LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.\u003cbr\u003e2. LED is RED: communication between ST-LINK\/V2 and the PC is established (end of enumeration).\u003cbr\u003e3. LED is blinking GREEN\/RED: data are being exchanged between the target and the PC.\u003cbr\u003e4. LED is GREEN: the last communication has been successful.\u003cbr\u003e5. LED is ORANGE: ST-LINK\/V2 communication with the target has failed.\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52629318664539,"sku":"ZY14344747","price":92.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY14344747.jpg?v=1773979841"}],"url":"https:\/\/www.gadgethq.co\/collections\/electronics-module.oembed?page=12","provider":"GadgetHQ","version":"1.0","type":"link"}