{"title":"Electronics Module - Mini PC Accessories","description":null,"products":[{"product_id":"waveshare-lora-hat-433mhz-frequency-band-for-raspberry-pi-applicable-for-europe-asia-africa-433mhz","title":"Waveshare LoRa HAT 433MHz Frequency Band for Raspberry Pi, Applicable for Europe \/ Asia \/ Africa, 433MHz","description":"Overview\u003cbr\u003e1. This is a Raspberry Pi LoRa HAT based on SX1268, covers 433MHz frequency band. It allows data transmission up to 5km through serial port.\u003cbr\u003e2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.\u003cbr\u003e3. Comparing with normal LoRa modules, the SX1268 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards\u003cbr\u003e2. Onboard CP2102 USB TO UART converter, for serial debugging\u003cbr\u003e3. Bring the UART control interface, for connecting host boards like Arduino\/STM32\u003cbr\u003e4. 4x LED indicators, easy to check the module status\u003cbr\u003e5. LoRa spread spectrum modulation technology, up to 84 available signal channel, longer communication distance, more robust to interference\u003cbr\u003e6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region\u003cbr\u003e7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications\u003cbr\u003e8. Customizable communication key which wont be retrieved, greatly improves the security of user data\u003cbr\u003e9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment\u003cbr\u003e10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network\u003cbr\u003e11. Support wireless parameter configuration, by sending wireless command\/data packet, remotely configure or retrieve the module parameter\u003cbr\u003e12. Support fixed-point transmission, broadcast, signal channel monitor\u003cbr\u003e13. Come with development resources and manual (examples for Raspberry Pi\/STM32)\u003cbr\u003e\u003cbr\u003eWhat is on Board\u003cbr\u003e1. SX1268 LoRa module\u003cbr\u003e2. 74HC125V: voltage level translator\u003cbr\u003e3. CP2102: USB TO UART converter\u003cbr\u003e4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi\u003cbr\u003e5. USB TO UART port\u003cbr\u003e6. UART header: for connecting host boards like STM32\/Arduino\u003cbr\u003e7. SMA antenna connector\u003cbr\u003e8. IPEX antenna connector\u003cbr\u003e9. Indicators:\u003cbr\u003e- RXD\/TXD: UART RX\/TX indicator\u003cbr\u003e- AUX: auxiliary indicator\u003cbr\u003e- PWR: power indicator\u003cbr\u003e10. UART selection jumpers\u003cbr\u003e- A: Control the LoRa module through USB TO UART\u003cbr\u003e- B: Control the LoRa module through Raspberry Pi\u003cbr\u003e- C: Access Raspberry Pi through USB TO UART\u003cbr\u003e11. LoRa mode selection jumpers\u003cbr\u003e- Short M0, short M1: Transmission mode\u003cbr\u003e- Short M0, open M1: Configuration mode\u003cbr\u003e- Open M0, short M1: WOR mode\u003cbr\u003e- Open M0, open M1: deep sleep mode\u003cbr\u003e\u003cbr\u003eSpecification\u003cbr\u003e1. RF module: SX1268\u003cbr\u003e2. Frequency band: 410.125 ~ 493.125MHz\u003cbr\u003e3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)\u003cbr\u003e4. Transmit power: 22.0dBm (10\/13\/17\/22dBm programmable)\u003cbr\u003e5. Receive sensitivity: -147dBm (radio rate 2.4kbps)\u003cbr\u003e6. Power consumption: \u003cbr\u003e- Transmit current: 110mA (transient consumption)\u003cbr\u003e- Receive current: 11mA\u003cbr\u003e- Sleep current: 2uA (LoRa module software shutoff)\u003cbr\u003e7. Communication interface: UART (TTL level)\u003cbr\u003e8. Baudrate: 1200bps ~ 115200bps (9600bps by default)\u003cbr\u003e9. Packet length: 240 Byte (32\/64\/128\/240 Byte programmable)\u003cbr\u003e10. Cache: 1000 Byte\u003cbr\u003e11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)\u003cbr\u003e12. Power supply: 5V\u003cbr\u003e13. Logic level: 3.3V\/5V\u003cbr\u003e14. Operating temperature: -40~85 degree C\u003cbr\u003e15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications\u003cbr\u003e16. Dimensions: 7cm x 12cm x 2cm\u003cbr\u003e17. Weight: 69g\u003cbr\u003e18. Packing List:\u003cbr\u003e- SX1268 433MHz LoRa HAT x1\u003cbr\u003e- USB type A plug to micro plug cable x1\u003cbr\u003e- 433MHz antenna x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"433MHz","offer_id":52628780581211,"sku":"ZY23018506","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY23018506.jpg?v=1773966085"},{"product_id":"waveshare-mini-io-board-full-ver-mini-computer-base-box-with-metal-case-cooling-fan-for-raspberry-pi-cm4-mini-io-board-full-ver","title":"Waveshare Mini IO Board Full Ver Mini-Computer Base Box with Metal Case \u0026 Cooling Fan for Raspberry Pi CM4, Mini IO Board Full Ver","description":"\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003e1. USB:  \u003cbr\u003e- USB 2.0 x 2 \u003cbr\u003e- USB 2.0 x 2 (via FFC connector) \u003cbr\u003e2. GPIO: Raspberry Pi 40 PIN GPIO x 1 \u003cbr\u003e3. Header: M.2 slot x 1 \u003cbr\u003e4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output \u003cbr\u003e5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) \u003cbr\u003e6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) \u003cbr\u003e7. Power input: 5V \u003cbr\u003e8. FAN: 5V \/ 12V (no fan control) \u003cbr\u003e9. RJ45 Ethernet: Gigabit Ethernet \u003cbr\u003e10. CM4 slot: Suitable for all variants of Compute Module 4 \u003cbr\u003e11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants \u003cbr\u003e12. Size: 85.0 x 56.0mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. CM4-IO-BASE-B x 1 \u003cbr\u003e2. Metal case (top and bottom) x 1 \u003cbr\u003e3. Fan-4010-PWM-5V x 1 \u003cbr\u003e4. Screwdriver x 1 \u003cbr\u003e5. Screws pack x 1 \u003cbr\u003e6. 5V 3A USB-C power adapter x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Mini IO Board Full Ver \/ EU Plug","offer_id":52628862271835,"sku":"DIY0181EU","price":80.99,"currency_code":"USD","in_stock":true},{"title":"Mini IO Board Full Ver \/ US Plug","offer_id":52628862304603,"sku":"DIY0181US","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0181EU.jpg?v=1773970614"},{"product_id":"waveshare-dual-gigabit-ethernet-5g-4g-computer-box-with-cooling-fan-for-raspberry-pi-cm4","title":"Waveshare Dual Gigabit Ethernet 5G\/4G Computer Box with Cooling Fan for Raspberry Pi CM4","description":"1. CM4 Socket: Suitable for all variants of Compute Module 4 \u003cbr\u003e2. Networking:  \u003cbr\u003e- Dual Gigabit Ethernet RJ45 \u003cbr\u003e- M.2 B KEY, for connecting 5G \/ 4G module \u003cbr\u003e- Nano-SIM card slot, supports standard Nano-SIM card for 5G\/4G\/3G\/2G communication \u003cbr\u003e3. USB: USB 3.2 Gen1 x 2 \u003cbr\u003e4. PIN header: Raspberry Pi 40PIN GPIO header \u003cbr\u003e5. Display: MIPI DSI port (15pin 1.0mm FPC connector) \u003cbr\u003e6. Camera: MIPI CSI-2 port x 2 (15pin 1.0mm FPC connector) \u003cbr\u003e7. Video: HDMI x 2, supports 4K 30fps output \u003cbr\u003e8. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 \u003cbr\u003e9. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants \u003cbr\u003e10. FAN HEADER: 5V\/12V (12V by default), allows speed adjustment and measurement \u003cbr\u003e11. Power input: 5V\/2.5A \u003cbr\u003e12. Size: 99.6 x 87.0mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"EU Plug","offer_id":52628863451483,"sku":"DIY0217EU","price":127.99,"currency_code":"USD","in_stock":true},{"title":"US Plug","offer_id":52628863484251,"sku":"DIY0217US","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0217EU.jpg?v=1773970668"},{"product_id":"waveshare-industrial-iot-wireless-expansion-module-for-raspberry-pi-cm4","title":"Waveshare Industrial IoT Wireless Expansion Module for Raspberry Pi CM4","description":"\u003cb\u003eAbout The Protuct\u003c\/b\u003e\u003cbr\u003eThis is an industrial expansion module based on Raspberry Pi CM4, which features common interfaces such as Gigabit Ethernet, HDMI, USB, and GPIO, allows additional 4G \/ 5G \/ LoRa wireless communication modules to be connected via the M.2 or Mini-PCIe socket. There are also industrial interfaces\/resources including RS485, CAN, and RTC. \u003cbr\u003e \u003cbr\u003eCombined with the industrial rail-mount protection case, the module is an ideal choice for building IoT gateway, 4G\/5G router, IoT data acquisition, or even the PLC device in industrial automatic control system, and more.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications\u003c\/b\u003e\u003cbr\u003e1. CM4 socket: For all variants of Compute Module 4 \u003cbr\u003e2. Networking: \u003cbr\u003e- Gigabit Ethernet RJ45 \u003cbr\u003e- M.2 B KEY \/ Mini-PCIe (via adapter), for connecting 5G \/ 4G \/ LoRa wireless module \u003cbr\u003e- Nano-SIM card slot, support standard Nano-SIM card for 5G\/4G\/3G\/2G communication \u003cbr\u003e3. USB: USB 2.0 x 3 \u003cbr\u003e4. PIN header: Non-isolated RS485 x 2, non-isolated CAN x 1, some GPIO pins \u003cbr\u003e5. Camera: MIPI CSI-2 x 1 (15pin 1.0mm FPC connector) \u003cbr\u003e6. Video: HDMI x 1, support 4K 30fps output \u003cbr\u003e7. RTC: Real-time clock with battery socket and ability to wake Compute Module 4 \u003cbr\u003e8. Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants \u003cbr\u003e9. Fan header: 5V\/12V, allows speed adjustment and measurement \u003cbr\u003e10. Power input: 5V or 7~36V \u003cbr\u003e11. Dimensions: 145 x 90 x 40mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. CM4-IO-WIRELESS-BASE x 1 \u003cbr\u003e2. PCIe to 4G\/LoRa adapter x 1 \u003cbr\u003e3. Screwdriver x 1 \u003cbr\u003e4. Screws pack x 1 \u003cbr\u003e5. 12V 2A power adapter x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"EU Plug","offer_id":52628864565595,"sku":"DIY0234EU","price":196.99,"currency_code":"USD","in_stock":true},{"title":"US Plug","offer_id":52628864598363,"sku":"DIY0234US","price":196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0234EU.jpg?v=1773970710"},{"product_id":"waveshare-sx1262-lora-hat-915mhz-frequency-band-for-raspberry-pi-applicable-for-america-oceania-asia-915mhz","title":"Waveshare SX1262 LoRa HAT 915MHz Frequency Band for Raspberry Pi, Applicable for America \/ Oceania \/ Asia, 915MHz","description":"Overview\u003cbr\u003e1. This is a Pi LoRa HAT based on SX1262, covers 915MHz frequency band. It allows data transmission up to 5km through serial port.\u003cbr\u003e2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.\u003cbr\u003e3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards\u003cbr\u003e2. Onboard CP2102 USB TO UART converter, for serial debugging\u003cbr\u003e3. Bring the UART control interface, for connecting host boards like Arduino\/STM32\u003cbr\u003e4. 4x LED indicators, easy to check the module status\u003cbr\u003e5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference\u003cbr\u003e6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region\u003cbr\u003e7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications\u003cbr\u003e8. Customizable communication key which wont be retrieved, greatly improves the security of user data\u003cbr\u003e9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment\u003cbr\u003e10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network\u003cbr\u003e11. Support wireless parameter configuration, by sending wireless command\/data packet, remotely configure or retrieve the module parameter\u003cbr\u003e12. Support fixed-point transmission, broadcast, signal channel monitor\u003cbr\u003e13. Come with development resources and manual (examples for Raspberry Pi\/STM32)\u003cbr\u003e\u003cbr\u003eWhat is on Board\u003cbr\u003e1. SX1262 LoRa module\u003cbr\u003e2. 74HC125V: voltage level translator\u003cbr\u003e3. CP2102: USB TO UART converter\u003cbr\u003e4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi\u003cbr\u003e5. USB TO UART port\u003cbr\u003e6. UART header: for connecting host boards like STM32\/Arduino\u003cbr\u003e7. SMA antenna connector\u003cbr\u003e8. IPEX antenna connector\u003cbr\u003e9. Indicators:\u003cbr\u003e- RXD\/TXD: UART RX\/TX indicator\u003cbr\u003e- AUX: auxiliary indicator\u003cbr\u003e- PWR: power indicator\u003cbr\u003e10. UART selection jumpers\u003cbr\u003e- A: Control the LoRa module through USB TO UART\u003cbr\u003e- B: Control the LoRa module through Raspberry Pi\u003cbr\u003e- C: Access Raspberry Pi through USB TO UART\u003cbr\u003e11. LoRa mode selection jumpers\u003cbr\u003e- Short M0, short M1: Transmission mode\u003cbr\u003e- Short M0, open M1: Configuration mode\u003cbr\u003e- Open M0, short M1: WOR mode\u003cbr\u003e- Open M0, open M1: deep sleep mode\u003cbr\u003e\u003cbr\u003eSpecification\u003cbr\u003e1. RF module: SX1262\u003cbr\u003e2. Frequency band: 850.125 ~ 930.125MHz\u003cbr\u003e3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)\u003cbr\u003e4. Transmit power: 22.0dBm (10\/13\/17\/22dBm programmable)\u003cbr\u003e5. Receive sensitivity: -147dBm (radio rate 2.4kbps)\u003cbr\u003e6. Power consumption: \u003cbr\u003e- Transmit current: 133mA (transient consumption)\u003cbr\u003e- Receive current: 11mA\u003cbr\u003e- Sleep current: 2uA (LoRa module software shutoff)\u003cbr\u003e7. Communication interface: UART (TTL level)\u003cbr\u003e8. Baudrate: 1200bps ~ 115200bps (9600bps by default)\u003cbr\u003e9. Packet length: 240 Byte (32\/64\/128\/240 Byte programmable)\u003cbr\u003e10. Cache: 1000 Byte\u003cbr\u003e11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)\u003cbr\u003e12. Power supply: 5V\u003cbr\u003e13. Logic level: 3.3V\/5V\u003cbr\u003e14. Operating temperature: -40~85 degree C\u003cbr\u003e15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications\u003cbr\u003e16. Dimensions: 7cm x 12cm x 2cm\u003cbr\u003e17. Weight: 69g\u003cbr\u003e18. Packing List:\u003cbr\u003e- SX1262 915MHz LoRa HAT x1\u003cbr\u003e- USB type A plug to micro plug cable x1\u003cbr\u003e- 915MHz antenna x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"915MHz","offer_id":52629322105179,"sku":"ZY23017425","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY23017425.jpg?v=1773980156"},{"product_id":"waveshare-sx1262-lora-hat-868mhz-frequency-band-for-raspberry-pi-applicable-for-europe-asia-africa-868mhz","title":"Waveshare SX1262 LoRa HAT 868MHz Frequency Band for Raspberry Pi, Applicable for Europe \/ Asia \/ Africa, 868MHz","description":"Overview\u003cbr\u003e1. This is a Raspberry Pi LoRa HAT based on SX1262, covers 868MHz frequency band frequency band. It allows data transmission up to 5km through serial port.\u003cbr\u003e2. By utilizing the new generation LoRa spread spectrum modulation technology, the communication distance of the module is as long as 5km, also supports auto repeating to transmit longer. Other features include Wake on Radio, wireless config, carrier sensing, communication key, and so on.\u003cbr\u003e3. Comparing with normal LoRa modules, the SX1262 LoRa HAT achieves longer communication distance, higher rate, lower consumption, better safety and anti-interference. It is suitable for various applications such as industrial control, smart home, data collection, etc.\u003cbr\u003e\u003cbr\u003eFeatures\u003cbr\u003e1.Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards\u003cbr\u003e2. Onboard CP2102 USB TO UART converter, for serial debugging\u003cbr\u003e3. Bring the UART control interface, for connecting host boards like Arduino\/STM32\u003cbr\u003e4. 4x LED indicators, easy to check the module status\u003cbr\u003e5. LoRa spread spectrum modulation technology, up to 81 available signal channel, longer communication distance, more robust to interference\u003cbr\u003e6. Auto multi-level repeating, suit for ultra long range communication, allows multi network on the same region\u003cbr\u003e7. Low power consumption features like deep sleeping and Wake on Radio, ideal for battery-powered applications\u003cbr\u003e8. Customizable communication key which wont be retrieved, greatly improves the security of user data\u003cbr\u003e9. Support LBT, monitoring the signal channel noise before transmitting, greatly improves the success ratio under extreme environment\u003cbr\u003e10. Support RSSI signal intensity indicating, for evaluating signal quality, tuning the network\u003cbr\u003e11. Support wireless parameter configuration, by sending wireless command\/data packet, remotely configure or retrieve the module parameter\u003cbr\u003e12. Support fixed-point transmission, broadcast, signal channel monitor\u003cbr\u003e13. Come with development resources and manual (examples for Raspberry Pi\/STM32)\u003cbr\u003e\u003cbr\u003eWhat is on Board\u003cbr\u003e1. SX1262 LoRa module\u003cbr\u003e2. 74HC125V: voltage level translator\u003cbr\u003e3. CP2102: USB TO UART converter\u003cbr\u003e4. Raspberry Pi GPIO connector: for connecting with Raspberry Pi\u003cbr\u003e5. USB TO UART port\u003cbr\u003e6. UART header: for connecting host boards like STM32\/Arduino\u003cbr\u003e7. SMA antenna connector\u003cbr\u003e8. IPEX antenna connector\u003cbr\u003e9. Indicators:\u003cbr\u003e- RXD\/TXD: UART RX\/TX indicator\u003cbr\u003e- AUX: auxiliary indicator\u003cbr\u003e- PWR: power indicator\u003cbr\u003e10. UART selection jumpers\u003cbr\u003e- A: Control the LoRa module through USB TO UART\u003cbr\u003e- B: Control the LoRa module through Raspberry Pi\u003cbr\u003e- C: Access Raspberry Pi through USB TO UART\u003cbr\u003e11. LoRa mode selection jumpers\u003cbr\u003e- Short M0, short M1: Transmission mode\u003cbr\u003e- Short M0, open M1: Configuration mode\u003cbr\u003e- Open M0, short M1: WOR mode\u003cbr\u003e- Open M0, open M1: deep sleep mode\u003cbr\u003e\u003cbr\u003eSpecification\u003cbr\u003e1. RF module: SX1262\u003cbr\u003e2. Frequency band: 850.125 ~ 930.125MHz\u003cbr\u003e3. Radio rate: 0.3kbps ~ 62.5kbps (programmable)\u003cbr\u003e4. Transmit power: 22.0dBm (10\/13\/17\/22dBm programmable)\u003cbr\u003e5. Receive sensitivity: -147dBm (radio rate 2.4kbps)\u003cbr\u003e6. Power consumption: \u003cbr\u003e- Transmit current: 133mA (transient consumption)\u003cbr\u003e- Receive current: 11mA\u003cbr\u003e- Sleep current: 2uA (LoRa module software shutoff)\u003cbr\u003e7. Communication interface: UART (TTL level)\u003cbr\u003e8. Baudrate: 1200bps ~ 115200bps (9600bps by default)\u003cbr\u003e9. Packet length: 240 Byte (32\/64\/128\/240 Byte programmable)\u003cbr\u003e10. Cache: 1000 Byte\u003cbr\u003e11. Experimental range: 5km (condition: cloudless and wild, altitude 2.5m, antenna gain 5dBi, radio rate 2.4kbps)\u003cbr\u003e12. Power supply: 5V\u003cbr\u003e13. Logic level: 3.3V\/5V\u003cbr\u003e14. Operating temperature: -40~85 degree C\u003cbr\u003e15. Applications: Smart home, industrial sensors, building automation, smart meters, and more other IoT applications\u003cbr\u003e16. Dimensions: 7cm x 12cm x 2cm\u003cbr\u003e17. Weight: 69g\u003cbr\u003e18. Packing List:\u003cbr\u003e- SX1262 868MHz LoRa HAT x1\u003cbr\u003e- USB type A plug to micro plug cable x1\u003cbr\u003e- 868MHz antenna x1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"868MHz","offer_id":52629322301787,"sku":"ZY23043811","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/ZY23043811.jpg?v=1773980167"},{"product_id":"control-board-with-8-channel-digital-input-output-built-in-xtensa-32-bit-lx7-dual-core-processor-waveshare-esp32-s3-poe-eth-8di-8do","title":"Control Board With 8-Channel Digital Input \u0026 Output, Built-In Xtensa 32-Bit LX7 Dual-Core Processor, Waveshare ESP32-S3-POE-ETH-8DI-8DO","description":"\u003cbr\u003e1. Based on the ESP32-S3 microcontroller, featuring an integrated Xtensa 32-bit LX7 dual-core processor with a maximum clock speed of 240MHz\u003cbr\u003e2. Integrated 2.4GHz Wi-Fi and Bluetooth 5 (LE) dual-mode wireless communication with outstanding RF performance\u003cbr\u003e3. Output employs Darlington transistors with optocoupler isolation for enhanced drive capability, sink current up to 500mA, and built-in freewheeling diode protection\u003cbr\u003e4. Digital inputs feature bidirectional optocoupler isolation, supporting both passive and active inputs; digital outputs support switch-input interlock control mode\u003cbr\u003e5. On-board isolated RS485 interface facilitates expansion with various RS485 Modbus industrial modules or sensors\u003cbr\u003e6. On-board isolated CAN interface enables connection to diverse CAN devices\u003cbr\u003e7. On-board header pins allow integration with additional peripherals\u003cbr\u003e8. On-board USB Type-C port supports power delivery and debugging for convenient development\u003cbr\u003e9. On-board terminal block power supply interface supporting 7V to 36V wide voltage range for industrial power applications\u003cbr\u003e10. On-board RTC clock chip supporting scheduled tasks\u003cbr\u003e11. On-board W5500 Ethernet chip providing 10\/100Mbps network connectivity via SPI interface\u003cbr\u003e12. On-board PoE module implements Ethernet power delivery (compliant with IEEE 802.3af standard)\u003cbr\u003e13. On-board optocoupler isolation prevents external circuit interference with control chips\u003cbr\u003e14. On-board digital isolation prevents external signal interference with control chips\u003cbr\u003e15. On-board integrated power isolation provides stable isolated voltage; isolated terminals require no additional power supply\u003cbr\u003e16. Onboard Micro SD card slot for external SD card storage of images or files\u003cbr\u003e17. Onboard buzzer, RGB indicator light, power indicator, RS485 transmit\/receive indicator, and CAN indicator for easy monitoring of device operational status\u003cbr\u003e18. Rail-mount protective enclosure for convenient installation and enhanced safety\u003cbr\u003e\u003cbr\u003eParameters\u003cbr\u003e1. Microcontroller: ESP32-S3\u003cbr\u003e2. Wireless communication: 2.4GHz Wi-Fi (802.11 b\/g\/n), Bluetooth 5 (LE)\u003cbr\u003e3. USB interface:\u003cbr\u003e- Interface form: USB Type-C\u003cbr\u003e- Power supply voltage: 5V\u003cbr\u003e- USB interface functions: device power supply, USB communication, firmware download, etc.\u003cbr\u003e4. Isolated RS485 communication interface:\u003cbr\u003e- Interface form: terminal block\u003cbr\u003e- Direction control: automatic control set by the main control hardware flow\u003cbr\u003e- Interface protection: TVS diode protection, surge and static protection\u003cbr\u003e- Matching resistance: default NC, reserved 120R matching resistance, can be enabled by jumper cap\u003cbr\u003e5. Isolated CAN communication interface:\u003cbr\u003e- Interface form: terminal block\u003cbr\u003e- Direction control: hardware automatically determines and controls the data transmission direction\u003cbr\u003e- Interface protection: TVS diode protection, surge and static protection\u003cbr\u003e- Matching resistance: default NC, reserved 120R matching resistance, can be enabled by jumper cap\u003cbr\u003e6. Network port: PoE port, supports IEEE 802.3af standard\u003cbr\u003e7. Digital output:\u003cbr\u003e- Output channels: 8 channels\u003cbr\u003e- Input voltage range: 5V - 40V\u003cbr\u003e- Output type: open-collector output, output load 500mA\/channel (MAX)\u003cbr\u003e- Isolation type: optocoupler isolation\u003cbr\u003e8. Digital input:\u003cbr\u003e- Input channels: 8 channels\u003cbr\u003e- Input voltage range: 5V - 36V\u003cbr\u003e- Input type: passive input \/ active input (NPN type or PNP type)\u003cbr\u003e- Isolation type: bidirectional optocoupler isolation\u003cbr\u003e9. Indicator lights\u003cbr\u003e- RGB: colorful cool light beads, can be customized to display colors\u003cbr\u003e- PWR: power indicator light, connected to USB, turns red when voltage is detected\u003cbr\u003e- TXD: transmission indicator light, turns green when data is sent from RS485\/CAN interface\u003cbr\u003e- RXD: reception indicator light, turns blue when data is received from RS485\/CAN interface\u003cbr\u003e10. Terminal power supply: power supply range: 7V - 36V\u003cbr\u003e11. Enclosure: DIN-rail mount protective enclosure\u003cbr\u003e12. Size: about 17.5 x 9 x 4cm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Waveshare ESP32-S3-POE-ETH-8DI-8DO","offer_id":52629648376155,"sku":"TBD0606505501","price":101.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD0606505501.jpg?v=1773991426"},{"product_id":"waveshare-multi-protection-8-channel-industrial-relay-module-for-raspberry-pi-pico-20218","title":"Waveshare Multi Protection 8-Channel Industrial Relay Module for Raspberry Pi Pico, 20218","description":"\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e1. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal \u003cbr\u003e2. Onboard photocoupler isolation, prevent interference from external high-voltage circuit connected to the relay \u003cbr\u003e3. High quality relay, contact rating: 10A 250V AC or Less than or equal 10A 30V DC \u003cbr\u003e4. ABS protection enclosure with rail-mount support, easy to install, safe to use \u003cbr\u003e5. Breakout USB port and BOOT pin, make it easy to debug without disassembling the enclosure \u003cbr\u003e6. PWR indicator, RGB LED, and passive buzzer outside the enclosure \u003cbr\u003e7. Come with development resources and manual (Raspberry Pi Pico C\/C++ and MicroPython examples)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification\u003c\/b\u003e\u003cbr\u003e1. Operation voltage: 5V \u003cbr\u003e2. Relay channel: 8CH \u003cbr\u003e3. Communication protocol: USB \u003cbr\u003e4. Contact form: 1NO 1NC \u003cbr\u003e5. Communication interface: Micro USB\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List\u003c\/b\u003e\u003cbr\u003e1. ABS protection enclosure (top and bottom) x 1 \u003cbr\u003e2. Pico-Relay-B x 1 \u003cbr\u003e3. Screwdriver x 1 \u003cbr\u003e4. Screws pack x 1\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"20218","offer_id":52633153732955,"sku":"DIY0158","price":45.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0158.jpg?v=1774029161"},{"product_id":"waveshare-mini-base-board-a-for-raspberry-pi-compute-module-4-base-board-a-for-raspberry-pi-cm4","title":"Waveshare Mini Base Board A for Raspberry Pi Compute Module 4, Base Board A For Raspberry Pi CM4","description":"1. USB: \u003cbr\u003e- USB 2.0 x 2 \u003cbr\u003e- USB 2.0 x 2 (via FFC connector) \u003cbr\u003e2. GPIO: Raspberry Pi 40 PIN GPIO x 1 \u003cbr\u003e3. Header: M.2 slot x 1 \u003cbr\u003e4. HD media interface: HDMI x 2, 1x via FFC connector, support 4K 30fps output \u003cbr\u003e5. DSI display: MIPI DSI x 1 (15pin 1.0mm FPC) \u003cbr\u003e6. CSI camera: MIPI CSI-2 x 2 (15pin 1.0mm FPC) \u003cbr\u003e7. Power input: 5V \u003cbr\u003e8. FAN: 5V \/ 12V (no fan control) \u003cbr\u003e9. RJ45 Ethernet: Gigabit Ethernet \u003cbr\u003e10. CM4 slot: Suitable for all variants of Compute Module 4 \u003cbr\u003e11. SD card slot: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants \u003cbr\u003e12. Size: 85.0 x 56.0mm\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Base Board A For Raspberry Pi CM4","offer_id":52633155895643,"sku":"DIY0193","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/DIY0193.jpg?v=1774029223"},{"product_id":"waveshare-isolated-rs485-can-hat-for-raspberry-pi","title":"Waveshare Isolated RS485 CAN HAT For Raspberry Pi","description":"1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards\u003cbr\u003e2. 1-Ch CAN, adopts MCP2515 controller and CAN transceiver, converts SPI to CAN\u003cbr\u003e3. 2-Ch RS485, adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485\u003cbr\u003e4. Onboard power conversion circuit, supports 8~28V wide voltage power supply, can power the Raspberry Pi at the same time\u003cbr\u003e5. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal\u003cbr\u003e6. Onboard unibody digital isolation, for isolating the signal, reliable and jamproof, low power consumption\u003cbr\u003e7. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof \u0026amp; anti-electrostatic\u003cbr\u003e8. Onboard resettable fuse and protection diodes, ensures the current\/voltage stable outputs, provides over-current\/over-voltage proof, improves shock resistance\u003cbr\u003e9. Onboard 120Ω terminal resistor, configured by jumper\u003cbr\u003e10. Onboard terminals and pin headers, more convenient connection\u003cbr\u003e11. Breakout SPI control pins, for connecting with host control boards\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"Default Title","offer_id":52633219727707,"sku":"EDA0039550","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/EDA0039550.jpg?v=1774030496"},{"product_id":"waveshare-din-rail-rs485-to-rj45-serial-server-with-poe-function-23273","title":"Waveshare Din Rail RS485 to RJ45 Serial Server with POE Function, 23273","description":"1. Power supply: 9-24V\u003cbr\u003e2. Communication interface: RS485 port x 1, Ethernet port x 1\u003cbr\u003e3. Baud rate: 300-115200 bps\u003cbr\u003e4. Data bits: 5-9 bits\u003cbr\u003e5. Configuration: host, web browser, device management function library\u003cbr\u003e6. Communication method: TCP\/IP direct communication, VCOM\u003cbr\u003e7. Working temperature: -40 degrees to 85 degrees\u003cbr\u003e8. Main function: Bidirectional transparent data transmission between RS485 and Ethernet\u003cbr\u003e9. It is easy to combine multi-rail installed serial servers together, more freedom.\u003cbr\u003e10. It is suitable for Modbus grid upgrade and can be used in conjunction with 3D configuration software.\u003cbr\u003e11. Support TCP server \/ TCP client \/ UDP mode \/ UDP multicast.\u003cbr\u003e12. Multi-host rolling polling support, easy for cloud communication and device identification.\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"23273","offer_id":52633221562715,"sku":"EDA0039554","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/EDA0039554.jpg?v=1774030516"},{"product_id":"industrial-control-board-communication-device-supports-wifi-bluetooth-built-in-multiple-protection-circuits-32154","title":"Industrial Control Board Communication Device Supports WiFi \/ Bluetooth Built-In Multiple Protection Circuits, 32154","description":"\u003cbr\u003e1. Microcontroller: ESP32-S3 (default is ESP32-S3R8 chip)\u003cbr\u003e2. Wireless communication: 2.4GHz Wi-Fi (802.11 b\/g\/n), Bluetooth 5 (LE)\u003cbr\u003e3. USB interface:\u003cbr\u003e- Interface type: Type-C\u003cbr\u003e- Power supply voltage: 5V\u003cbr\u003e- Functions: power supply for the device, USB communication, firmware download, etc.\u003cbr\u003e4. Isolated RS485 communication interface:\u003cbr\u003e- Interface type: terminal block\u003cbr\u003e- Direction control: automatically controlled by the main control hardware flow setting\u003cbr\u003e- Interface protection: provides TVS diode protection, surge and static protection\u003cbr\u003e- Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap\u003cbr\u003e5. Isolated CAN communication interface:\u003cbr\u003e- Interface type: terminal block\u003cbr\u003e- Direction control: hardware automatically determines and controls the data transmission direction\u003cbr\u003e- Interface protection: provides TVS diode protection, surge and static protection\u003cbr\u003e- Matching resistance: default NC, reserved 120R matching resistor, can be enabled by jumper cap\u003cbr\u003e6. Indicator lights:\u003cbr\u003e- PWR: power indicator light, connected to USB, turns red when voltage is detected\u003cbr\u003e- RS485: RS485 indicator light: Green when data is sent from the RS485 interface, blue when data is sent back from the RS485 interface\u003cbr\u003e- CAN: CAN indicator light, flashes when data communication exists at the CAN interface\u003cbr\u003e7. Terminal power supply range: 7V - 36V\u003cbr\u003e8. Shell: rail-mounted protective shell\u003cbr\u003e9. Size: about 9.16 x 2.33 x 5.87cm \u003cbr\u003e\u003cbr\u003eFeature:\u003cbr\u003e1. Based on the ESP32-S3 single-chip microcontroller, it is equipped with an Xtensa 32-bit LX7 dual-core processor with a maximum clock frequency of 240MHz\u003cbr\u003e2. It integrates 2.4GHz Wi-Fi and low-power Bluetooth 5 (LE) dual-mode wireless communication, featuring excellent radio performance\u003cbr\u003e3. It has an isolated RS485 interface, facilitating the external expansion of various RS485 Modbus industrial expansion modules or sensors\u003cbr\u003e4. It has an isolated CAN interface, facilitating the external expansion of various CAN devices\u003cbr\u003e5. It has an edge connector interface, allowing for the connection of other devices\u003cbr\u003e6. It has a USB Type-C interface, which can be used for power supply and download debugging, facilitating development use\u003cbr\u003e7. It has an isolated wiring terminal power supply interface, supporting a wide voltage range of 7V - 36V, facilitating the use of industrial power supply ports\u003cbr\u003e8. It has an RTC clock chip, supporting timing tasks\u003cbr\u003e9. It has digital isolation to avoid external signal interference to the control chip\u003cbr\u003e10. It has an integrated power isolation unit, which can provide stable isolated voltage, and the isolated end does not require additional power supply\u003cbr\u003e11. It has RS485 receiver and transmitter indicator lights and CAN operation indicator lights, facilitating the perception of the devices operating status\u003cbr\u003e\u003cbr\u003e","brand":"GadgetHQ","offers":[{"title":"32154","offer_id":52635473609051,"sku":"TBD0606432901","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1003\/1041\/7755\/files\/TBD0606432901.jpg?v=1774054972"}],"url":"https:\/\/www.gadgethq.co\/collections\/electronics-module-mini-pc-accessories.oembed","provider":"GadgetHQ","version":"1.0","type":"link"}